NEW! 70-411 EXAM] MICROSOFT.BRAINDUMPS.BY.SACRIESTORY_AIKONFX.383Q EXAM B PART4 (61-80) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the 70-411 examsavior exam? What are the new questions of the latest 70-411  exam? Braindumps 70-411  VCE dumps and 70-411  PDF dumps will tell you all about the 70-411 examsavior exam.Here are the examsavior newest and covered all new added questions and answers, which will help you 100% passing 70-411 examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

QUESTION 61
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows
Server 2012.
You have a Group Policy object (GPO) named GPO1 that contains several custom Administrative templates.
You need to filter the GPO to display only settings that will be removed from the registry when the GPO falls out of scope. The solution must
only display settings that are either enabled or disabled and that have a comment.

How should you configure the filter?
To answer, select the appropriate options below. Select three.

A. Set Managed to: Yes

B. Set Managed to: No
C. Set Managed to: Any
D. Set Configured to: Yes
E. Set Configured to: No
F. Set Configured to: Any
G. Set Commented to: Yes
H. Set Commented to: No
I. Set Commented to: Any
Correct Answer: ADG
Section: 6. Configure and manage Group Policy
Explanation
Explanation/Reference:
QUESTION 62
Your network contains an Active Directory domain named adatum.com.
You need to audit changes to the files in the SYSVOL shares on all of the domain controllers. The solution must minimize the amount of
SYSVOL replication traffic caused by the audit.
Which two settings should you configure? (Each correct answer presents part of the solution. Choose two.)
A. Audit Policy\Audit system events
B. Advanced Audit Policy Configuration\DS Access
C. Advanced Audit Policy Configuration\Global Object Access Auditing
D. Audit Policy\Audit object access
E. Audit Policy\Audit directory service access
F. Advanced Audit Policy Configuration\Object Access
Correct Answer: DF
Section: 6. Configure and manage Group Policy
Explanation
Explanation/Reference:
Notes:
Here object access must be monitored on the share \\contoso.local\ ysvol. This is possible on general audit policy and the Advanced Audit Policy
Configuration.

The nine basic audit policies under Computer Configuration \ Policies \ Windows Settings \ Security Settings \ Local Policies \ Audit Policy allow
you to configure security monitoring policy settings for various behavior of which generate some much more audit events than others.
An administrator must review all generated events, regardless of whether they are of interest or not. Starting with Windows Server 2008 R2 and
Windows 7 can monitor the client behavior on the computer or on the network targeted administrators, so that it is easier for them to abnormalities faster
identify.
For example, there are under Computer Configuration \ Policies \ Windows Settings \ Security Settings \ Local Policies \ Audit Policy only one
policy setting for logon events: Audit logon events.
Under Computer Configuration \ Policies \ Windows Settings \ Security Settings \ Advanced Audit Policy Configuration \ System Audit
Policies, you can instead select the category logon / logoff eight different policy settings.
In this way you can control the aspects of logon and logoff you can track precisely.
QUESTION 63
Your network contains multiple Active Directory sites.
You have a Distributed File System (DFS) namespace that has a folder target in each site.
You discover that some client computers connect to DFS targets in other sites.
You need to ensure that the client computers only connect to a DFS target in their respective site.
What should you modify?
A. The properties of the Active Directory sites
B. The properties of the Active Directory site links
C. The delegation settings of the namespace
D. The referral settings of the namespace
Correct Answer: D
Section: 2. Configure file and print services
Explanation
Explanation/Reference:
Notes:
When a user accesses a namespace root or DFS folder with targets, the client computer receives an ordered list of servers or locations. This list is
called a reference. Upon receipt of the reference to the computer attempts to access the first server in the list. If the server is not available, an attempt is

made by the client computer to access the next server.
If a server is unavailable, you can configure clients to fail back to the preferred server is running, as soon as it is available again. By default, targets are
set within the client’s site on the first digits of the sorted list.
Then, the following entries for servers in other locations, which can be arranged by different sorting methods If only the folder targets are approved
within the client site, the sorting method can exclude targets outside of the client site to be selected.
The figure illustrates the configuration options:
Explanation:

QUESTION 64
Your network contains an Active Directory domain named adatum.com. The domain contains five servers. The servers are configured as shown in the
following table.

All desktop computers in adatum.com run Windows 8 and are configured to use BitLocker Drive Encryption (BitLocker) on all local disk drives.
You need to deploy the Network Unlock feature. The solution must minimize the number of features and server roles installed on the
network.
To which server should you deploy the feature?
A. Server3
B. Server1
C. DC2
D. Server2
E. DC1
Correct Answer: B
Section: 2. Configure file and print services
Explanation
Explanation/Reference:
Explanation:
The BitLocker-NetworkUnlock feature must be installed on a Windows Deployment Server (which does not have to be configured–the WDSServer
service just needs to be running).

Notes 2 :
The BitLocker Netzwerkentsperrung enables easier administration of desktops and servers with BitLocker, which relies on the TPM + PIN protection
method in a domain environment. If a connected to a wired corporate network computer is rebooted, enables Netzwerkentsperrung to bypass the PIN
prompt. It unlocks BitLocker-protected operating system volume automatically, by using as a secondary authentication method one provided by the
Windows Deployment Services available trusted key. For BitLocker Netzwerkentsperrung the following software and hardware requirements that must
be met prior to use are: Client Computer Requirements
A implemented in the UEFI firmware DHCP driver
Trusted Platform Module (TPM) 1.2 or TPM 2.0
BitLocker for the operating system volume enabled
Server requirements of Windows Deployment Services
Installed BitLocker Netzwerkentsperrung
X.509 certificate public / private RSA key pair (2,048 bits) in FVENKP certificate store
To use the Netzwerkentsperrung you must configure a Windows Deployment Services server for Netzwerkentsperrung, create the key pair for use with
the Netzwerkentsperrung and deploy the Netzwerkentsperrungszertifikat for the client computer.
QUESTION 65
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012.
You pre-create a read-only domain controller (P.QDC) account named RODC1.
You export the settings of RODC1 to a file named File1.txt.
You need to promote RODC1 by using File1.txt.
Which tool should you use?
A. The Install-WindowsFeature cmdlet
B. The Add-WindowsFeature cmdlet
C. The Dism command
D. The Install-ADDSDomainController cmdlet
E. The Dcpromo command
Correct Answer: E
Section: 5. Configure and manage Active Directory

Explanation
Explanation/Reference:
Notes:
Dcpromo.exe deprecated in Windows Server 2012 Design. You can use it for unattended installations but still.
If you’re in Windows Server 2012 “dcpromo.exe” run (with no parameters) from a command prompt, you will be redirected via a message to Server
Manager, where Active Directory Domain Services with the wizard can install the Add Roles.
If you /dcpromo unattend run from a command prompt, you can still perform automatic installations with Dcpromo.exe.
So organizations can continue to use automated installation routines with dcpromo.exe for Active Directory Domain Services (AD DS), to write these
routines with new Windows PowerShell.
QUESTION 66
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named dcl.contoso.com. You discover
that the Default Domain Policy Group Policy objects (GPOs) and the Default Domain Controllers Policy GPOs were deleted.
You need to recover the Default Domain Policy and the Default Domain Controllers Policy GPOs. What should you run?
A. dcgpofix.exe /target:domain
B. gpfixup.exe /dc:dc1.contoso.co,n
C. dcgpofix.exe /target:both
D. gptixup.exe /oldnb:contoso /newnb:dc1
Correct Answer: C
Section: 6. Configure and manage Group Policy
Explanation
Explanation/Reference:
Notes:
This command-line tool Dcgpofix there since Windows Server 2003. It allows the rebuild of the two default Group Policy objects (GPOs) Default
Domain Policy (DDP) and Default Domain Controllers Policy (ddCDP) or is it the two GPOs to their default settings if you exist.
Parameter /Target specifies what you want to restore the two default GPOs. Here the self-explanatory values are domain, DC or Both possible.
The command-line utility GPFixup resolves issues with references to domain names, which can possibly occur during a domain rename.
QUESTION 67
Your network contains an Active Directory domain named contoso.com. The domain contains more than 100 Group Policy objects (GPOs). Currently,

there are no enforced GPOs.
You need to prevent all of the GPOs at the site level and at the domain level from being applied to users and computers in an organizational
unit (OU) named OU1.
You want to achieve this goal by using the minimum amount of Administrative effort. What should you use?
A. dcgpofix
B. Get-GPOReport
C. Gpfixup
D. Gpresult
E. Gptedit.msc
F. Import-GPO
G. Import-GPO
H. Restore-GPO
I. Set-GPInheritance
J. Set-GPLink
K. Set-GPPermission
L. Gpupdate
M. Add-ADGroupMember
Correct Answer: I
Section: 6. Configure and manage Group Policy
Explanation
Explanation/Reference:
Notes:
The cmdlet Set-GPInheritance enable or disable inheritance for a given organizational unit and thus prevents GPOs that are linked to a higher level, are
applied to the objects of being surrounded OU.
The following call disables inheritance parent GPOs for OU CBTest the root of the domain:
Set-GPinheritance -target “ou = contosoTest, dc = contoso, dc = com” -IsBlocked Yes
QUESTION 68
Your network contains two Active Directory forests named contoso.com and adatum.com. All domain controllers run Windows Server 2012. The
adatum.com domain contains a Group Policy object (GPO) named GPO1. An administrator from adatum.com backs up GPO1 to a USB flash drive.
You have a domain controller named dc1.contoso.com. You insert the USB flash drive in dc1.contoso.com.

You need to identify the domain-specific reference in GPO1. What should you do?
A. From Group Policy Management, run the Group Policy Results Wizard.
B. From the Migration Table Editor, click Populate from GPO.
C. From Group Policy Management, run the Group Policy Modeling Wizard.
D. From the Migration Table Editor, click Populate from Backup.
Correct Answer: D
Section: 6. Configure and manage Group Policy
Explanation
Explanation/Reference:
https://technet.microsoft.com/en-us/library/cc779961(v=ws.10).aspx
QUESTION 69
Your network contains an Active Directory domain named contoso.com. All client computers run Windows Vista Service Pack 2 (SP2). All client
computers are in an organizational unit (OU) named 0U1. All user accounts are in an OU named OU2. All users log on to their client computer by using
standard user accounts.
A Group Policy object (GPO) named GPO1 is linked to OU1.
A GPO named GP02 is linked to 0U2. You need to apply advanced audit policy settings to all of the client computers.
What should you do?
A. In GPO1, configure a startup script that runs auditpol.exe.
B. In GPO2, configure a logon script that runs auditpol.exe.
C. In GPO1, configure the Advanced Audit Policy Configuration settings.
D. In GPO2, configure the Advanced Audit Policy Configuration settings.
Correct Answer: A
Section: 6. Configure and manage Group Policy
Explanation
Explanation/Reference:
Notes:
All versions of Windows Server 2008 R2 and Windows 7 that can process Group Policy, (Advanced Audit Policy Configuration) can be configured to use
the new security monitoring extensions. Versions of Windows Server 2008 R2 and Windows 7 that can not join a domain, do not have access to these
features. Between 32-bit and 64-bit versions of Windows 7 there is no difference in supporting security monitoring. In addition, some special
considerations with regard to various tasks are required, are known to be associated with the monitoring enhancements in Windows Server 2008 R2

and Windows 7 :
Create an audit policy.
To create an advanced Windows security auditing policy must be used 7 a computer running Windows Server 2008 R2 or Windows. You can use the
Group Policy Management Console on a computer running Windows 7 after the Remote Server Administration Tools installed.
Apply auditing policy settings.
If you use Group Policy to apply the advanced audit policy settings and global object access settings must be running on client computers Windows
Server 2008 R2 or Windows 7. Moreover, only computers running Windows Server 2008 R2 or Windows 7, providing reporting data with information on
basic access.
Developing an audit policy model.
To plan advanced security audit settings and global object access settings, you must use the Group Policy Management Console, which is aligned to a
domain controller that is running Windows Server 2008 R2.
Distributing the audit policy.
After developing a GPO that includes advanced security auditing settings, it can be distributed by domain controllers running any Windows server
operating system is running using. However, if you can not place any client computer that is running Windows 7, in a separate organizational unit (OU),
use the Windows Management Instrumentation filtering to ensure that the advanced policy settings are only for client computers that are running
Windows 7, taken ,Advanced audit policy settings may also be acquired for client computers running Windows Vista. However, the audit policies for
these client computers must be separately created and acquired by using the logon script of type “Auditpol.exe”.
The combined use of the basic audit policy settings under Local Policies \ Audit Policy and the advanced settings under Configuration of the extended
audit policy may have unexpected results. Therefore, two sets of audit policy settings should not be combined. If you are using the advanced
configuration settings for the monitoring policy, select the policy setting monitoring: Subcategory the audit policy setting force (Windows Vista or
later) to set Settings category in the audit policy repealed under Local Policies \ Security Options. This conflicts between similar settings can be
prevented by the basic safeguards will be ignored.
QUESTION 70
Your network contains an Active Directory domain named contoso.com. Domain controllers run either Windows Server 2008, Windows Server 2008 R2,
or Windows Server 2012.
You have a Password Settings object (PSOs) named PSO1.
You need to view the settings of PSO1. Which tool should you use?
A. Group Policy Management
B. Get-ADFineGrainedPasswordPolicy

C. Get-ADDefaultDomainPasswordPolicy
D. Server Manager
Correct Answer: B
Section: 5. Configure and manage Active Directory
Explanation
Explanation/Reference:
Fine-grained password policies (Fine grained password policies) are not implemented on Group Policy objects (GPOs), but directly in the Active
Directory as PSOs (Password Setting Objects, PSOs) created and linked to groups or user accounts.
The following call lists the settings of the Password Settings object PSO1 at the Windows PowerShell:
Get-ADFineGrainedPasswordPolicy -Filter {name -eq “PSO1”}
QUESTION 71
You have a server named Server1 that runs Windows Server 2012. Server1 has the Remote Access server role installed. On Server1, you create a
network policy named Policy1.
You need to configure Policy1 to apply only to VPN connections that use the L2TP protocol.
What should you configure in Policy1?
A. The Tunnel Type
B. The Service Type
C. The NAS Port Type
D. The Framed Protocol
Correct Answer: A
Section: 4. Configure a Network Policy Server infrastructure
Explanation
Explanation/Reference:
Notes:
A condition type Tunnel type the Directive can be filtered on a specific protocol:

QUESTION 72
Your network contains an Active Directory domain named contoso.com. You have a standard primary zone names contoso.com.
You need to ensure that only users who are members of a group named Group1 can create DNS records in the contoso.com zone.

All other users must be prevented from creating, modifying, or deleting DNS records in the zone.
What should you do first?
A. Run the Zone Signing Wizard for the zone.
B. From the properties of the zone, change the zone type.
C. Run the new Delegation Wizard for the zone.
D. From the properties of the zone, modify the Start of Authority (SOA) record.
Correct Answer: B
Section: 3. Configure network services and access
Explanation
Explanation/Reference:
Notes:
For a standard primary zone security settings can be configured. In the first step the zone in Active Directory must be integrated. In the second step the
security settings of the zone can then be configured.
QUESTION 73
The contoso.com domain contains a DNS server named Server1 that host a primary zone. Server2 contains a secondary zone for the contoso.com
domain.
You need to configure how long Server2 queries Server1 to renew the zone.
What should you configure?
A. Refresh interval
B. Restart DNS
C. Forwarders
D. Stub zone
Correct Answer: A
Section: 3. Configure network services and access
Explanation
Explanation/Reference:
QUESTION 74
You have a server named Server1 that runs Windows Server 2012. Server1 has the Remote Access server role installed. On Server1, you create a

network policy named PPTP_Policy.
You need to configure PPTP_Policy to apply only to VPN connections that use the PPTP protocol.
What should you configure in PPTP_Policy?
A. The Service Type
B. The Tunnel Type
C. The Framed Protocol
D. The NAS Port Type
E. MS-RAS-Vendor ID
F. Authentication Type
Correct Answer: B
Section: 4. Configure a Network Policy Server infrastructure
Explanation
Explanation/Reference:
Notes:
A condition type Tunnel type the Directive can be filtered on a specific protocol:

QUESTION 75
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8. Your company has users who work from
home. Some of the home users have desktop computers. Other home users have laptop computers. All of the computers are joined to the domain.

All of the computer accounts are members of a group named Group1. Currently, the home users access the corporate network by using a PPTP VPN.
You implement DirectAccess by using the default configuration and you specify Group1 as the DirectAccess client group.
The home users who have desktop computers report that they cannot use DirectAccess to access the corporate network.
The home users who have laptop computers report that they can use DirectAccess to access the corporate network.
You need to ensure that the home users who have desktop computers can access the network by using DirectAccess. What should you
modify?
A. The security settings of the computer accounts for the desktop computers
B. The membership of the RAS and IAS Servers group
C. The WMI filter for Direct Access Client Settings GPO
D. The conditions of the Connections to Microsoft Routing and Remote Access server policy
Correct Answer: C
Section: 3. Configure network services and access
Explanation
Explanation/Reference:
Notes:
By default, the DirectAccess wizard DirectAccess prepared by applying a WMI filter on the GPO for the client settings for all laptops and notebook
computers in the domain.
To apply the settings of the GPOs for DirectAccess clients on all the group CBRemotecomputer computer, we need to change or remove the WMI filter.
QUESTION 76
Your network contains a single Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the
primary DNS zone for contoso.com. All servers dynamically register their host names. You install the new Web servers that host identical copies of your
company’s intranet website.
The servers are configured as shown in the following table.

You need to use DNS records to load balance name resolution queries for intranet.contoso.com between the two Web servers. What is the
minimum number of DNS records that you should create manually?

A. 1
B. 2
C. 3
D. 4
Correct Answer: B
Section: 3. Configure network services and access
Explanation
Explanation/Reference:
QUESTION 77
You have a Direct Access Server named Server1 running Server 2012.
You need to add prevent users from accessing websites from an Internet connection.
What should you configure?
A. Split Tunneling
B. Security Groups
C. Force Tunneling
D. Network Settings
Correct Answer: C
Section: 3. Configure network services and access
Explanation
Explanation/Reference:
Notes:

If Direct Access is configured for Tunnelerzwingung, compounds of the DirectAccess client to the internal network and the Internet via the remote
access server are routed. In the corporate network a proxy or a web filter can then be used, which blocks access to certain sites. By default, the option is
not enabled Tunnelerzwingung use. The figure shows the default setting in the wizard for DirectAccess configuration:
QUESTION 78
Your network contains an Active Directory domain named contoso.com. The domain does not contain a certification authority (CA). All servers run
Windows Server 2012. All client computers run Windows 8.
You need to add a data recovery agent for the Encrypting File System (EFS) to the domain.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two).

A. From the Default Domain Controllers policy, select Create Data Recovery Agent.
B. From the Default Domain Controllers policy, select Add Data Recovery Agent.
C. From Windows PowerShell, run Get-Certificate.
D. From the Default Domain Policy, select Add Data Recovery Agent.
E. From a command prompt, run cipher.exe.
F. From the Default Domain Policy, select Create Data Recovery Agent.
Correct Answer: DE
Section: 2. Configure file and print services
Explanation
Explanation/Reference:
QUESTION 79
Your network contains an Active Directory domain named contoso.com. The domain functional level in Windows Server 2008. All domain controllers run
Windows Server 2008 R2. The domain contains a file server named Server1 that runs Windows Server 2012. Server1 has a BitLocker Drive Encryption
(BitLocker)-encrypted drive. Server1 uses a trusted Platform Module (TPM) chip.
You enable the Turn on TPM backup to Active Directory Domain Services policy setting by using a Group Policy object (GPO).
You need to ensure that you can back up the BitLocker recovery information to Active Directory.
What should you do?
A. Upgrade a domain controller to Windows 2012.
B. Enable the Store BitLocker recovery information in the Active Directory Services (Windows Server2008 and Windows Vista) policy settings.
C. Raise the forest functional level to Windows 2008 R2.
D. Add a BitLocker data recovery agent
Correct Answer: B
Section: 2. Configure file and print services
Explanation
Explanation/Reference:
Notes:
The recovery password and the recovery key for an operating system drive or a built-in data drive, in a folder will be stored or printed out online on one
or more USB devices or in your Microsoft account.
For removable media the recovery password and the recovery key can in a folder or are stored online or printed in your Microsoft account. By default, it

is not possible to store a recovery key for a removable drive on a removable storage device.
A domain administrator also has the ability to configure the Group Policy so that all BitLocker-protected drives automatically generate recovery
passwords and this in the Active Directory Domain Services ( Active Directory Domain Services, AD DS) are stored.
QUESTION 80
Your network contains an Active Directory domain named contoso.com. The domain does not contain a certification authority (CA). All servers run
Windows Server 2012. All client computers run Windows 8.
You need to add a data recovery agent for the Encrypting File System (EFS) to the domain.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From Windows PowerShell, run Get-Certificate.
B. From the Default Domain Controllers Policy, select Create Data Recovery Agent.
C. From the Default Domain Policy, select Add Data Recovery Agent.
D. From a command prompt, run cipher.exe.
E. From the Default Domain Policy, select Create Data Recovery Agent.
F. From the Default Domain Controllers Policy, select Add Data Recovery Agent.
Correct Answer: CD
Section: 2. Configure file and print services
Explanation
Explanation/Reference:

Latest online browsing the 70-411 exam!

70-411 PDF dumps & 70-411 VCE dumps: http://examsavior.com/70-411

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/