2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART27 (611-630) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the 400-101 Examsavior exam? What are the new questions of the latest 400-101 exam? Examsavior 400-101 VCE dumps and 400-101 PDF dumps will tell you all about the 400-101 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing  400-101 Examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

QUESTION 611

Refer to the exhibit.

Which command can you enter to resolve this error message on a peer router?

A. username <username> password <password>

B. ppp chap <hostname>

C. aaa authorization exec if-authenticated

D. aaa authorization network if-authenticated

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 612

Refer to the exhibit.

R2 is configured as the R1 neighbor in area 51, but R2 fails to receive the configured summary route. Which action can you take to correct the problem?

A. Replace the summary-address command with the area-range command.

B. Configure a summary address under R1interface GigabitEthernet0/0.

C. Configure a summary address under R1 interface GigabitEthernet1/0.

D. Configure the no discard-route command in the OSPF process of R1.

E. Configure ip ospf network broadcast under the Loopback0 interface of R1.

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 613

Which two descriptions of the keying mechanisms that are used to distribute the session keys used in routing authentication are true? (Choose two.)

A. Peer keying creates a unique one-to-one relationship with another peer.

B. Group keying creates a single keying message to multiple peers.

C. Peer keying creates a single keying message to multiple peers.

D. Group keying creates a unique one-to-one relationship with another peer.E. Group keying creates a full mesh of keying sessions to all devices.

F. Peer keying creates a full mesh of keying sessions to all devices.

Correct Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 614

How many address families can a single OSPFv3 instance support?

A. 1

B. 2

C. 5

D. 10

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 615

Which two conditions must be met by default to implement the BGP multipath feature? (Choose two.)

A. The next-hop routers must be the same.

B. Route reflectors must be enabled.

C. All attributes must have the same values.

D. MPLS must be enabled.

E. The next-hop routers must be different.

Correct Answer: CE

Section: Mix Questions

ExplanationExplanation/Reference:

QUESTION 616

Which two statements about LDP advertising when Explicit Null is in effect are true? (Choose two.)

A. Penultimate hop popping is disabled.

B. Penultimate hop popping is enabled.

C. It is the default behavior for LDP.

D. It is used for the advertisement of static routes.

E. It is used for the advertisement of connected routes.

Correct Answer: AE

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 617

You are configuring a DMVPN hub to perform CBWFQ on a per-spoke basis. Which information is used to identify the spoke?

A. the NHRP network ID

B. the spoke tunnel source IP

C. the spoke tunnel interface IP address

D. the NHRP group

Correct Answer: D

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 618

Which option is true about output policing for the control plane?

A. It improves router performance by limiting traffic sent to the control plane.

B. It improves router performance by limiting traffic sent from the control plane.

C. It improves router performance by limiting traffic sent to and from the control plane.

D. It controls traffic originated from the router.

Correct Answer: D

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 619

Which two types of traffic are blocked when the storm control threshold for multicast traffic is reached on a port? (Choose two.)

A. BPDU

B. OSPF

C. CDP

D. IS-IS

E. LLDP

Correct Answer: BD

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 620

Which two options are contained in the MSG part of a syslog message? (Choose two.)

A. TAG field

B. CONTENT field

C. three-digit priority value

D. IP address of the sending device

E. TLS port number

Correct Answer: AB

Section: Mix QuestionsExplanation

Explanation/Reference:

QUESTION 621

Which two values are needed to configure NTP authentication? (Choose two.)

A. the encryption method

B. the key number

C. the burst mode

D. the key string

E. the Diffie-Hellman group

Correct Answer: BD

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 622

You are configuring a DHCPv6 client for a DHCPv6 server with the prefix delegation feature. Which option is a result of the interface configuration when you enter

the command ipv6 address autoconfig default?

A. a static IPv6 default route pointing to the upstream DHCP server

B. a static IPv6 default route pointing to the upstream DHCP relay

C. a static IPv6 default route pointing to the upstream router

D. a temporary stateless address, formed from the EUI-64 bit address and the prefix from the route advertisement of the upstream router

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 623

Refer to the exhibit.

You are bringing a new MPLS router online and have configured only what is shown to bring LDP up. Assume that the peer has been configured in a similar

manner. You verify the LDP peer state and see that there are no neighbors. What will the output of show mpls ldp discovery show?

A. Interfaces:

Ethernet0/0 (ldp): xmit

B. Interfaces:

Ethernet0/0 (ldp): xmit/recv

LDP Id: 25.25.25.2:0; IP addr: 192.168.12.2

C. Interfaces:

Ethernet0/0 (ldp): xmit/recv

LDP Id: 192.168.12.2:0; no route

D. Interfaces:

Ethernet0/0 (ldp): xmit/recv

LDP Id: 25.25.25.2:0; no route

Correct Answer: D

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 624

Which three features are common to OSPF and IS-IS? (Choose three.)

A. They both maintain a link-state database from which a Dijkstra-based SPF algorithm computes a shortest path tree.

B. They both use DR and BDR in the broadcast network.

C. They both use hello packets to form and maintain adjacencies.D. They both use NSSA and stub type areas to scale the network design.

E. They both have areas to form a two-level hierarchical topology.

Correct Answer: ACE

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 625

Refer to the exhibit.

Which two commands are required on R3 in order for MPLS to function? (Choose two.)

A. mpls ipB. ip cef

C. mpls label protocol tdp

D. mpls ip propagate-ttl

Correct Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 626

Which two statements about the assert process in LAN-based PIM are true? (Choose two.)

A. If the metrics are the same, the router with the lowest advertised routing protocol metric for that route is elected.

B. If the metrics are the same, the router with the highest IP address on the LAN is elected.

C. If the metrics are the same, the router with the highest advertised routing protocol metric for that route is elected.

D. If the metrics are the same, the router with the lowest IP address on the LAN is elected.

Correct Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 627

Which two options are the two underlying protocols on which a DMVPN relies? (Choose two.)

A. IPsec

B. NHRP

C. GDOI

D. ISAKMP

E. SSL

F. NLRI

Correct Answer: AB

Section: Mix QuestionsExplanation

Explanation/Reference:

QUESTION 628

Which three parameters must match to establish OSPF neighbor adjacency? (Choose three.)

A. the process ID

B. the hello interval

C. the subnet mask

D. authentication

E. the router ID

F. the OSPF interface priority

Correct Answer: BCD

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 629

Which IP SLA operation type uses IP to measure the round-trip time between a router and a device?

A. HTTP

B. ICMP Echo

C. ICMP Path Jitter

D. UDP Jitter for VoIP

Correct Answer: B

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 630

What are two reasons to use the ip ospf database filter all out command? (Choose two.)A. to maintain a centralized OSPF database on a single master device

B. to avoid flooding LSAs on low-speed links

C. to ensure a consistent OSPF database across the network

D. to selectively filter OSPF routes without disrupting the SPF algorithm

E. to filter only type 7 LSAs from an OSPF area

F. to enable OSPF to send triggered updates

Correct Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

Latest online browsing the 400-101 exam!

400-101 PDF dumps & 400-101 VCE dumps: http://examsavior.com/400-101

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/