2016NEW 350-080 EXAM] Cisco.CCIE Data Center Written Exam PART2 (21-40) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the 350-080 Examsavior exam? What are the new questions of the latest 350-080 exam? Examsavior 350-080 VCE dumps and 350-080  PDF dumps will tell you all about the 350-080 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing 350-080 Examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

NEW QUESTION 21 Which three options are valid SPAN sources? (Choose three.)
A.VLANs, because when a VLAN is specified as a SPAN source, all supported interfaces in the VLAN are SPAN sources
B.fabric port channels connected to the Cisco Nexus 2000 Series Fabric Extender
C.Layer 2 subinterfaces
D.satellite ports and host interface port channels on the Cisco Nexus 2000 Series Fabric Extender
E.Layer 3 subinterfaces
F.Remote Span Ethernet Ports

Answer: ABD NEW

QUESTION 22 Which four statements about SNMP implementation on the Cisco Nexus 7000 Series switch are true? (Choose four.)
A.Cisco NX-OS supports one instance of the SNMP per virtual device context.
B.By default, Cisco NX-OS uses the default VDC for SNMP.
C.SNMP supports multiple MIB module instances and maps them to logical network entities.
D.SNMP is VRF aware. You can configure SNMP to use a particular VRF to reach the SNMP notification host receiver.
E.Only SNMP version 3 is supported on NX-OS.
F.Cisco NX-OS supports one instance of the SNMP per switch.
G.Each VDC can have multiple SNMP sessions configured in it.
Answer: ABCD

NEW QUESTION 23 Which three statements about the configuration of vPC+ are true? (Choose three.)
A.The FabricPath switch ID must be configured under the vPC domain.
B.The virtual switch ID of vPC+ must be configured under the FabricPath domain.
C.On the Cisco Nexus 7000 switch, F1 interfaces must be used as the vPC+ peer links.
D.The vPC+ peer link must be configured as a Cisco FabricPath core port.
E.The FabricPath subswitch ID must be configured under the vPC domain.
F.There has to be atleast 4 virtual switches in the FabricPath domain.
Answer: ACD

NEW QUESTION 24
Refer to the exhibit. Which statement about the interface that is connected to the NPV core switch is true?

A.The switch that connects to the hosts is identified in the design as an NPV edge switch, and the port that connects to the core is an NP port.
B.The interface that is connected to the NPV switch will need to be configured as an N-Port.
C.The interface that is connected to the NPV core will become an FP port.
D.The link between the NPV core switch and edge will come up as an E port.
Answer: A

NEW QUESTION 25 When an NP port becomes operational, the NP switch first logs itself into the core switch by sending a FLOGI request (using the port WWN of the NP port). What will occur next?
A.The switch registers with the fabric name server.
B.The switch will perform a PLOGI to the port login server.
C.The switch will register parameters using FDISC.
D.The NPV switch will perform a PLOGI using FDISC to register with the fabric name server.
Answer: A

NEW QUESTION 26 The FCoE VLAN is used to carry FIP and FCoE traffic for the corresponding VSAN. Which two statements about this mapping are true? (Choose two.)
A.The VLAN-VSAN mapping must be configured consistently in the entire fabric.
B.This mapping can only carry Fibre Channel control and data traffic.
C.There must be same VLANs on the A and B SANs.
D.IP traffic is allowed if the interface is set to Shared.
E.The VLAN must match the CNA setting.
Answer: AB

NEW QUESTION 27

A.configures the FEX to send FCoE traffic only to this switch
B.allows mapped VLAN-VSAN traffic to reach the FEX
C.configures FEX for A-B SAN capabilities
D.allows interface Ethernet 101/1/1 to exchange DCBX information
Answer: A

NEW QUESTION 28 Refer to the exhibit. What is the most likely reason that VSAN 88 is initializing?

A.VSAN 88 is not mapped to a FCoE VLAN.
B.No host has logged into the VSAN.
C.The VSAN is shut down.
D.VSAN 88 is not part of the trunk yet.
Answer: B

NEW QUESTION 29 Which two actions must occur to disable the LAN traffic on an FCoE link to a host? (Choose two.)
A.interface Ethernet 1/1 shutdown lan
B.The switch sends a LAN logical link status message to the CNA host.
C.interface vfc11 shutdown lan
D.The switch send a PFC command to the CNA host.

E. interface Ethernet 1/1 vlan 10 disable

Answer: AB

NEW QUESTION 30 What is the main function of the device-alias distribute command?
A.This command distributes the device alias configuration on the existing switch to all the other switches in the Cisco Fabric Services region.
B.This command enables distribution and will send the configuration after a commit is executed.
C.This command changes the distribution mode for device aliases.
D.There is no such command.
Answer: B

NEW QUESTION 31 When a switch that supports enhanced zoning joins a fabric, which SW_ILS command does it use to determine the enhanced zoning capabilities of the other switches in the fabric?
A.MR
B.ESS
C.ELP
D.EFP
E.none of the above
Answer: B

NEW QUESTION 32 Refer to the exhibit. Which three statements about the exhibit output related to Cisco Fabric Services are true? (Choose three.)

A.The lock can only be released only by the operations manager user on the 10.1.1.11 switch.
B.The admin user on the 10.1.1.11 switch must clear the lock.
C.The tacacs+ commit command is the only command that can be used to clear the lock.
D.Any network-admin user can release the lock with the command clear tacacs+ session.
E.The operations manager user has started, but not committed, a configuration change for the feature tacacs+ command.

Answer: DEF NEW

QUESTION 33
Refer to the exhibit. Given the displays from N5K-1 and N5K-2, what is the expected result if the zone mode enhanced vsan 1 command is issued on N5K-1?

A.The mode change will complete with a warning that the zone database from N5K-1 will be distributed thoughout the fabric.
B.The mode change will not complete due to the mismatch in the default zone mode.
C.The mode change prompts the administrator to override the default zone mismatch and make them the same.
D.The mode change completes, and the default zone setting remains unchanged in N5K-1 and N5K- 2.
E.The default zone setting is set to deny in both switches because it is more secure.
Answer: A

NEW QUESTION 34 In DCBX feature negotiation, the switch and CNA exchange capability information and configuration values. Which three capabilities are supported in Cisco Nexus 5000 Series Switches? (Choose three.)
A.PFC
B.support for logical link up or down
C.FCoE
D.multicast
E.speed
F.duplex
Answer: ABC

NEW QUESTION 35 Which statement about the iSCSI initiator task tag is true?
A.The initiator assigns a task tag to each task it issues.
B.The target assigns a task tag on behalf of the initiator.
C.During the life of the task, this tag does not have to be unique.
D.SCSI may not use this tag as part of the SCSI task identifier.
Answer: A

NEW QUESTION 36 Which three management tools are available with DCNM-SAN Manager, Device Manager, and Performance Manager? (Choose three.)
A.Cisco Traffic Analyzer
B.Cisco Protocol Analyzer
C.Cisco Port Analyzer Adapter 2
D.Cisco Prime LMS
E.Cisco Prime NCS
F.Cisco Prime NMS
Answer: ABC

NEW QUESTION 37
Refer to the exhibit. Which two options describe information that can be determined from this output? (Choose two.)

A.the uplink interface that is operating as the designated receiver for broadcast traffic
B.the uplink interface that is operating as the designated sender for broadcast traffic
C.the switching mode for which the Fabric Interconnect is configured
D.the uplink interface from which multicast traffic will be sourced
E.whether the last respond code was accepted or not
Answer: AC

NEW QUESTION 38
Refer to the exhibit. You have associated a newly created service profile to a blade. When you examine the configured boot order and actual boot order, they do not match. Which two statements describe reasons for this mismatch? (Choose two.)

A.Having a single iSCSI boot target would prevent the profile from associating, and would generate a configuration error.
B.The server must complete a POST cycle before Cisco UCS Manager will update this information.
C.The blade needs to be reacknowledged.
D.The server is in the process of a firmware upgrade.
E.There may be a configuration error in the service profile.
Answer: BE

NEW QUESTION 39 Refer to the exhibit. You are configuring a UCS C-Series server for SAN boot over FCoE. The server fails to boot after the HBA option ROM loads.
Which option describes the most likely solution for this problem?

A.Decrease the vNIC MTU.
B.Set the vNIC Class of Service to a nonzero value.
C.Set the default VLAN to FCOE VLAN.
D.Set the vHBA Class of Service to 2.
E.Uncheck the PXE Boot option.
F.Disable Persistent LUN Binding.
Answer: C

NEW QUESTION 40 Refer to the exhibit. You are connecting a Cisco Nexus 2000 to an existing Cisco UCS Fabric Interconnect domain for C-Series integration. Which option describes the next Cisco Nexus 2000 that will be discovered?

A.FEX0101
B.FEX0003
C.FEX0102
D.FEX1000
E.FEX1001
Answer: B

Latest online browsing the 350-080 exam!

350-080 PDF dumps & 350-080 VCE dumps: http://examsavior.com/350-080

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/