2016NEW Cisco.CCIE.(400-101)EXAM] CCIE Routing and Switching EXAM A PART31 (701-720) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the 400-101 Examsavior exam? What are the new questions of the latest 400-101 exam? Examsavior 400-101 VCE dumps and 400-101 PDF dumps will tell you all about the 400-101 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing  400-101 Examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

QUESTION 701

When the BGP additional-paths feature is used, what allows a BGP speaker to differentiate between the different available paths?

A. The remote BGP peer prepends its own next-hop address to the prefix.

B. A unique path identifier is encoded into a dedicated field to the NLRI.

C. A route distinguisher is appended to the prefix by the receiving BGP speaker.

D. The additional path information is encoded in an extended community.

Correct Answer: B

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 702

Which option is the origin code when a route is redistributed into BGP?

A. IGP

B. EGP

C. external

D. incomplete

E. unknown

Correct Answer: D

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 703Which two BGP attributes are optional, non-transitive attributes? (Choose two.)

A. AS path

B. local preference

C. MED

D. weight

E. cluster list

Correct Answer: CE

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 704

Which two BGP attributes are optional, non-transitive attributes? (Choose two.)

A. AS path

B. local preference

C. MED

D. weight

E. cluster list

Correct Answer: CE

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 705

Which two statements about IBGP multipath are true? (Choose two.)

A. The IGP metric of the BGP next hop can be different from the best-path IGP metric if you configure the router for unequal-cost IBGP multipath.

B. The IGP metric of the BGP next hop must be the same as the best-path IGP metric.

C. The equivalent next-hop-self is performed on the best path from among the IBGP multipaths before it is forwarded to external peers.

D. The path should be learned from an external neighbor.E. The router BGP process must learn the path from a confederation-external or external neighbor.

F. The router BGP process must learn the path from an internal neighbor.

Correct Answer: AF

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 706

DRAG DROP

Drag each show command on the left to the description of its output on a PE router on the right.

Select and Place:

Correct Answer:

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 707

Refer to the exhibit.

Which three statements about the device with this configuration are true? (Choose three.)

A. Multiple AFIs are configured on the device.

B. The authentication on 172.16.129.7 is configured incorrectly.C. The device is configured to support MPLS VPNs.

D. This device is configured with a single AFI.

E. The authentication on 172.16.129.4 is configured incorrectly.

F. The device is configured to support L2VPNs.

Correct Answer: ABC

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 708

Which two attributes were introduced with the Cisco IOS BGP 4-byte ASN feature? (Choose two.)

A. AS4_AGGREGATOR

B. AS4_PATH

C. AS4_PLAIN

D. AS4_DOT

E. AS4_TRANS

Correct Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 709

Which three statements about the default behaviour of eBGP sessions are true? (Choose three.)

A. eBGP sessions between sub-ASs in different confederations transmit the next hop unchanged.

B. The next hop in an eBGP peering is the IP address of the neighbor that announced the route.

C. When a route reflector reflects a route to a client, it transmits the next hop unchanged.

D. The next hop in an eBGP peering is the loopback address of the interface that originated the route.

E. The next hop in an eBGP peering is the loopback address of the neighbor that announced the route.

F. When a route reflector reflects a route to a client, it changes the next hop to its own address.Correct Answer: ABC

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 710

DRAG DROP

Drag each IS-IS command on the left to its effect on the right.

Select and Place:

Correct Answer:

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 711

Which two values must be identical to allow IS-IS devices to become neighbors? (Choose two.)

A. interface MTU

B. authentication key

C. IP MTU

D. CLNS address

E. NSEL

F. area IDCorrect Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 712

Which two statements about IS-IS wide metrics are true? (Choose two.)

A. The wide metric is a 24-bit field.

B. The maximum link metric is 16777215.

C. R3 and R4 periodically advertise PNSP messages to synchronize the IS-IS database.

D. IS-IS devices that are enabled with wide metrics can become neighbors with a device that uses standard metrics.

E. The maximum link metric is 4261412864.

F. The maximum path metric is 16777215.

Correct Answer: AB

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 713

Which two options are requirements to implement 6VPE? (Choose two.)

A. MPLS between PEs

B. 6-in-4 tunnels between PEs

C. MP-BGP VPNv6 exchange

D. MP-BGP IPv6+label exchange

E. Any Transport over MPLS

F. IPv4/IPv6 dual-stack in core

Correct Answer: AC

Section: Mix Questions

ExplanationExplanation/Reference:

QUESTION 714

Which three statements about DMVPN are true? (Choose three.)

A. It facilitates zero-touch configuration for addition of new spokes.

B. It supports dynamically addressed spokes using DHCP.

C. It features automatic IPsec triggering for building an IPsec tunnel.

D. It requires uses of IPsec to build the DMVPN cloud.

E. Spokes can build tunnels to other spokes and exchange traffic directly.

F. It supports server load balancing on the spokes.

Correct Answer: ACE

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 715

What is the function of an implicit-null label?

A. It notifies the upstream LSR to remove the top label in the label stack and forward the packet.

B. It notifies the upstream LSR to add a VPN label to the label stack.

C. It is used to statically assign a label to an IGP route.

D. It is used to identify the router ID.

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 716

Which statement about a P router in a Layer 3 MPLS VPN is true?A. It is unaware of VPN routes.

B. It connects to customer edge routers.

C. It participates in MPLS VPN routing.

D. It uses the running IGP to share VPN routes.

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 717

Which statement about LISP encapsulation in an EIGRP OTP implementation is true?

A. OTP uses LISP encapsulation for dynamic multipoint tunneling.

B. OTP maintains the LISP control plane.

C. OTP uses LISP encapsulation to obtain routes from neighbors.

D. LISP learns the next hop.

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 718

Refer to the exhibit.

Your organization has two offices, Site 1 and Site 2, which are connected by a provider backbone, as shown. Where must you configure an attachment circuit to

allow the two sites to connect over a Layer 2 network using L2TPv3?

A. PE Site 1 Fa1/0 and PE Site 2 Fa0/0

B. CE Site 1 Fa0/0 and CE Site 2 Fa0/0

C. PE Site 1 Se0/0 and PE Site 2 Se0/0

D. CE Site 1 Fa0/0 and PE Site 2 Se0/0

Correct Answer: A

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 719

What are two benefits of Per-Tunnel QoS for DMVPN? (Choose two.)

A. The administrator can configure criteria that, when matched, can automatically set up QoS for each spoke as it comes online.

B. Traffic from each spoke to the hub can be regulated individually.

C. When traffic exceeds a configurable threshold, the spokes can automatically set up QoS with the hub.

D. The hub can send large packets to a spoke during allotted timeframes.

E. The hub can be regulated to prevent overloading small spokes.Correct Answer: AE

Section: Mix Questions

Explanation

Explanation/Reference:

QUESTION 720

Which two statements about VPLS are true? (Choose two.)

A. Split horizon is used on PE devices to prevent loops.

B. Spanning tree is extended from CE to CE.

C. IP is used to switch Ethernet frames between sites.

D. PE routers dynamically associate to peers.

E. VPLS extends a Layer 2 broadcast domain.

Correct Answer: AE

Section: Mix Questions

Explanation

Explanation/Reference:

Latest online browsing the 400-101 exam!

400-101 PDF dumps & 400-101 VCE dumps: http://examsavior.com/400-101

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/