2016NEW VMWare.VCP-510 EXAM] EXAM A PART2 (21-40) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the VCP-510 Examsavior exam? What are the new questions of the latest VCP-510 exam? Examsavior VCP-510 VCE dumps and VCP-510 PDF dumps will tell you all about the VCP-510 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing  VCP-510 Examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

QUESTION 21

An administrator attempts to increase the number of vCPUs in a virtual machine to 8.

The configuration cannot be successfully completed.

What are two likely causes of this issue? (Choose two.)

A. MS-DOS was selected as guest OS.

B. The host has 4 processor threads.

C. Virtual machine hardware version 7 was chosen.

D. The vSphere 5.x implementation is using a Standard license.

QUESTION 22

Which component is the metering tool for vCloud administration?

A. VMware vCenter Chargeback

B. VMware vCloud Service Manager

C. VMware vCloud Request Manager

D. VMware vCloud Director

QUESTION 23

An existing vSphere 4 environment will be upgraded to vSphere 5.x.

The current implementation utilizes ESXi 4.1 and the new implementation will use ESXi 5.x.

In which two ways will the new ESXi 5.x implementation differ from the ESXi 4.1 implementation? (Choose

two.)

A. VMware ESXi 5.x provides a host-based firewall.

B. VMware ESXi 5.x can boot from additional local sources such as a USB drive.

C. VMware ESXi 5.x can be managed from a web browser.

D. VMware ESXi 5.x can support virtual machines with larger hard drive configurations.

QUESTION 24

Which VMware solution allows for the automated discovery and mapping of applications running over the

VM infrastructure?

A. VMware vCloud Director

B. VMware vCenter Infrastructure Navigator

C. VMware Service Manager

D. VMware vSphere 5

QUESTION 25

Which two statements are true about VLANs and port groups defined on a vSphere Standard Switch?

(Choose two.)

A. A VLAN can be accessed by the entire virtual switch or individual port groups.

B. Multiple port groups are restricted from accessing the same VLAN.

C. VLANs can be configured only on individual port groups.

D. Multiple VLANs can be accessed by virtual machines connected to one port group.

QUESTION 26

A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks.

A new uplink is added to the vSwitch.

What is the status of the uplink by default?

A. The uplink is placed in standby mode until it is added to the active NIC team.

B. The uplink is marked as active but does not participate in the active NIC team until assigned to a port

group.

C. The uplink is marked as active, but cannot be used by the active NIC team until it is added to the

existing 802.3ad group on the physical switch.

D. The uplink is marked as unused until it is added to the active NIC team.

QUESTION 27

Which two statements are true regarding vSphere virtual switch uplinks? (Choose two.)

A. vSphere virtual switches do not need to be configured with an uplink.

B. Multiple vSphere virtual switches can be configured to use the same uplink.

C. vSphere virtual switches must be configured with at least one uplink.

D. Multiple vSphere virtual switches cannot be configured to use the same uplink.

QUESTION 28

A virtual machine, VM21, will be migrated between two ESXi 5.x hosts, labeled ESXi01 and ESXi02.

Each host has two vSphere Standard Switches (vSS), configured as follows:

1. vSwitch0 has a portgroup labeled Management and a portgroup labeled vMotion.

2. The Management portgroup contains a vmkernel port tagged for management traffic.

3. The vMotion portgroup contains a vmkernel port tagged for vMotion traffic.

4. vSwitch0 on ESXi01 has a single uplink attached to the 10.1.20.0/24 network.

5. vSwitch0 on ESXi02 has a single uplink attached to the 10.1.20.0/24 network.

6. Each host has a vSwitch1 with a Production portgroup used by virtual machine traffic.

7. Each vSwitch1 has an uplink attached to the 10.1.40.0/24 network.

What is true about migrating VM21 to the new host?

A. vMotion would be supported in this configuration.

B. Storage vMotion would not be supported in this configuration.

C. vMotion would not be supported in this configuration.

D. Storage vMotion would be supported if the storage device supports VAAI.

QUESTION 29

An administrator has been tasked with adding a newly installed uplink to vSwitch1.

Based on the exhibit, what is a true statement about this environment?

A. The server does not have available vSwitches to be assigned to this uplink.

B. The available uplinks are not compatible with a standard vSwitch.

C. The host needs a driver installed for the newly installed uplink.

D. The current uplinks cannot be attached because they are in use by other port groups.

QUESTION 30

Which settings are required for virtual machine guest tagging for VLAN 100 in a vSphere 5.x

environment?

A. Port Group configured for VLAN 100, physical switch configured as a VLAN trunk

B. Port Group configured for VLAN 4095, physical switch configured as a VLAN trunk

C. Port Group configured for VLAN 100, physical switch configured for VLAN 100

D. Port Group configured for VLAN 4095, physical switch configured for VLAN 100

QUESTION 31

When you are configuring the NIC teaming policy for a vSwitch,

what happens when the Failback option is set to Yes?

A. A failed uplink will be left inactive upon recovery until another uplink fails.

B. The physical switches are notified when a failover event occurs.

C. The physical switches are notified when a failback event occurs.

D. A failed uplink is returned to active duty immediately upon recovery.

QUESTION 32

Which three features are only available in the vSphere Client when using a vSphere Distributed Switch?

(Choose three.)

A. Port Mirroring

B. PVLAN tagging

C. Storage I/O Control

D. Ingress Traffic Shaping

E. 802.1q VLAN Tagging

QUESTION 33

What are three methods of adding virtual machine networking to a vSphere Distributed Switch? (Choose

three.)

A. A portgroup can be created using the vSphere client and virtual machines can be added using their

Properties tab.

B. A portgroup can be created as part of the Migrate Virtual Machine Networking wizard before virtual

machines are moved to the vDS.

C. A portgroup can be cloned from a vSphere Standard Switch, inheriting the virtual machines that were

attached to the cloned portgroup.

D. A portgroup can be created using the vSphere client and virtual machines can be migrated using the

Migrate Virtual Machine Networking wizard.

E. A portgroup can be created during the creation of the vDS and virtual machines can be migrated using

the Migrate Virtual Machine Networking wizard.

QUESTION 34

What are two network load-balancing policies for a vSphere Distributed Switch? (Choose two.)

A. Route based on source MAC hash

B. Route using physical NIC load

C. Route based on the destination virtual port ID

D. Route based on port ID hash

QUESTION 35

Which type of port on a secondary private VLAN can communicate with promiscuous ports and other ports

that share its VLAN tag?

A. Isolated

B. Promiscuous

C. Community

D. Trunked

QUESTION 36

Which methods can be used to migrate a VMkernel port from a vSphere Standard Switch to a vSphere

Distributed Switch? (Choose two.)

A. Use the Add Virtual Adapter wizard from the Manage Virtual Adapters window.

B. Use the Manage Hosts wizard from the Configuration tab of the vDS.

C. Use the Migrate Virtual Machine Networking option to select the port from a list.

D. Edit the Network Adapter settings for the port and select a dvPort group from the list.

QUESTION 37

Which statement describes the functionality of traffic shaping on a vSphere Standard Switch?

A. vSphere Standard Switches support only egress traffic shaping.

B. vSphere Standard Switches support both ingress and egress traffic shaping.

C. vSphere Standard Switches support best-effort traffic shaping based on quality of service (QoS).

D. vSphere Standard Switches support only ingress traffic shaping.

QUESTION 38

Which vSwitch or vSwitch port group policy setting allows packets to be received by a virtual machine with

different destination MAC addresses than the configured MAC address?

A. Promiscuous mode

B. Traffic shaping

C. Forged transmits

D. MAC address changes

QUESTION 39

What failure will beacon probing identify in vSphere networking?

A. An improper VLAN configuration on a physical switch port

B. A disconnected network cable

C. A VMkernel IP mismatch affecting vMotion or HA traffic

D. Jumbo frames improperly configured on an iSCSI target

QUESTION 40

An administrator is creating a vSphere Standard Switch with virtual machine and VMkernel networking.

The administrator has two uplinks attached to the switch and wants to make sure multiple sessions for a

virtual machine can utilize both uplinks.

Which load-balancing policy will guarantee this requirement is met, even if additional management or

virtual machine traffic is added to the switch in the future?

A. Route based on IP hash

B. Route based on source MAC hash

C. Route based on the originating port ID

D. Use explicit failover.

Latest online browsing the VCP-510 exam!

VCP-510 PDF dumps & VCP-510 VCE dumps: http://examsavior.com

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/