Do you want to pass the VCP-510 Examsavior exam? What are the new questions of the latest VCP-510 exam? Examsavior VCP-510 VCE dumps and VCP-510 PDF dumps will tell you all about the VCP-510 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing VCP-510 Examsavior exam.Hurry up and get the free exam from here!
NOW FREE DOWNLOAD
QUESTION 50
Where must the VMware vSphere Storage Appliance Manager (VSA Manager) be installed?
A. On a Windows virtual machine created on the first VSA host
B. The VSA Manager is deployed as a separate virtual appliance
C. On a vCenter Server outside of the VSA environment
D. It is pre-installed on the VMware vSphere Storage Appliance
QUESTION 51
Using the vSphere Storage Appliance (VSA) Manager to view the Appliances Status column, what are
three valid states? (Choose three.)
A. Degraded
B. Connected
C. Maintenance
D. Online
E. Offline
QUESTION 52
A virtual machine requires a 4TB disk for application data.
The storage administrator has already created and presented a 4TB LUN to an ESXi 5.x host.
The host is currently configured with a single 500GB VMFS5 datastore.
What is the next step the vSphere administrator must use to provision the data disk?
A. Create a virtual compatibility mode RDM mapping to the 4TB LUN.
B. Create a physical compatibility mode RDM mapping to the 4TB LUN.
C. Expand the existing VMFS volume to 4TB. Create a physical compatibility mode RDM mapping to the
4TB LUN.
D. Expand the existing VMFS volume to 4TB. Create a virtual compatibility mode RDM mapping to the
4TB LUN.
QUESTION 53
Which two statements are true about shared storage capabilities on NFS datastores supported by ESXi
5.x? (Choose two.)
A. You can create Fault Tolerant virtual machines
B. You can mount up to 256 NFS datastores
C. You can use VMware Storage APIs with all NFS datastores
D. You can use Storage vMotion from a virtual-mode RDM
QUESTION 54
A VMFS3 datastore has just been upgraded to VMFS5.
In what two ways does this affect the datastore? (Choose two.)
A. The existing VMFS3 block size is retained.
B. The block size will be changed to 8MB.
C. Any existing VMDK can be expanded up to 2TB.
D. VMDKs retain their size limit from the VMFS3 block size.
QUESTION 55
When planning for an upgrade from vSphere4 to vSphere5 what will be the effect of upgrading a 1TB
VMFS3 datastore with a 2MB block size to VMFS5?
A. Thick virtual disks can be expanded to a maximum of 2TB.
B. Thick virtual disks can be expanded to a maximum of 512GB.
C. Thin virtual disks can be expanded to a maximum of 512GB.
D. Thin virtual disks can be expanded to a maximum of 2TB.
QUESTION 56
![2016NEW VMWare.VCP-510 EXAM] EXAM A PART3 (50-70) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE 2016NEW VMWare.VCP-510 EXAM] EXAM A PART3 (50-70) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE](http://sugarexam.com/wp-content/uploads/2016/08/wps7302.tmp_.jpg)
Based on the exhibit, what is the appropriate action to set a preferred path?
A. Paths cannot be set to preferred on this array.
B. Right-click the path you want to prefer and then select Preferred.
C. Right-click the path you want to prefer then select Active.
D. Double-click the new path you wish to prefer. The other existing paths will be set to Standby.
QUESTION 57
![2016NEW VMWare.VCP-510 EXAM] EXAM A PART3 (50-70) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE 2016NEW VMWare.VCP-510 EXAM] EXAM A PART3 (50-70) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE](http://sugarexam.com/wp-content/uploads/2016/08/wps7303.tmp_.jpg)
Based on the exhibit, what is the reason that two of the paths are marked as Stand by?
A. The other two paths were set to Active.
B. The path configuration is required by the attached storage array.
C. The active paths were set to Preferred.
D. The storage adapters need to be rescanned before the paths will be set to Active.
QUESTION 58
What are two consequences of deleting a VMFS datastore from an ESXi 5.x host? (Choose two.)
A. The datastore is unaccessible from all connected ESXi hosts.
B. The datastore and all virtual machines are removed from the storage device.
C. The datastore and all virtual machines remain on the storage device.
D. The datastore is only removed from that specific ESXi host.
QUESTION 59
What are two reasons to upgrade a virtual machine’s hardware version? (Choose two.)
A. Migrate a virtual machine from a VMFS3 datastore to a VMFS5 datastore.
B. Add more than 4 NICs to a virtual machine.
C. Add more than 8 vCPUs to a virtual machine.
D. Increase the vRAM of the virtual machine to 512GB.
QUESTION 60
The Typical option is selected while running the New Virtual Machine Wizard in the vSphere Client.
Which three specific configuration options are included during virtual machine creation? (Choose three.)
A. Datastore location
B. Virtual machine version
C. Number of vCPUs
D. Storage DRS
E. Virtual disk size
QUESTION 61
An administrator is creating a virtual machine that will be running Windows 2008 Enterprise (64-bit).
The application to be installed in the virtual machine requires eight vCPUs to run effectively.
During installation, the only available options are one, two, three, or four vCPUs.
What condition explains the available vCPU selections?
A. The virtual machine hardware version is 8.
B. The guest operating system for the virtual machine is 64-bit.
C. The ESXi host has two non hyperthreaded dual-core CPUs.
D. The ESXi host has two hyperthreaded dual-core CPUs.
QUESTION 62
Windows virtual machines use a page file and Linux virtual machines use a swap partition for virtual
memory.
When you are determining the appropriate size for these, which file is affected?
A. The .vmx file
B. The .vswp file
C. The service console swap partition
D. The virtual disk size
QUESTION 63
The page file for a Windows guest operating system or the swap partition for a Linux guest operating
system is created by.
A. the ESXi host
B. the guest operating system
C. vCenter server
D. the VMFS datastore
QUESTION 64
What is the size of a virtual machine .vswp file?
A. The virtual machine .vswp file is equal to twice the amount of available memory configured for the
virtual machine when it was created.
B. The virtual machine .vswp file is equal to the amount of virtual memory (virtual machine available
memory, plus virtual machine overhead) configured for the virtual machine when it was created.
C. The virtual machine .vswp file is set to the amount of memory allocated minus any memory
reservation.
D. The virtual machine .vswp file is equal to the amount of available memory in the ESXi server.
QUESTION 65
An administrator is installing a Windows Server 2008 operating system into a virtual machine on an ESXi
5.x host.
What are two valid SCSI adaptors for this installation? (Choose two.)
A. Paravirtual SCSI
B. LSI Logic SAS
C. BusLogic SAS
D. Broadcom SAS
QUESTION 66
The Power and Suspend buttons for a virtual machine can be configured from the Options tab of the
virtual machine.
What are the two default actions that are configured for these buttons? (Choose two.)
A. The Suspend button suspends the VM though the guest OS.
B. The Power button does a graceful shutdown.
C. The Power button does a hard shutdown.
D. The Suspend button suspends the VM though ESXi.
QUESTION 67
Which network driver is not supported with virtual machine hardware version 8?
A. vmxnet 3
B. Enhanced vmxnet
C. vmxnet 2
D. E1000
QUESTION 68
Which virtual disk types are supported on an network attached storage appliance using NFS with hardware
acceleration disabled?
A. Flat disk
B. Raw Device Mappings
C. Thick Provision Lazy Zeroed
D. Thin Provision
QUESTION 69
A database administrator has requested a disk for a virtual machine that will run an I/O intensive database
application on an ESXi 5.x host.
Which two disk types will best fit the needs of the application? (Choose two.)
A. Raw Device Mapped Disk
B. Thin Provisioned Disk
C. Thick Provision Lazy Zeroed Disk
D. Thick Provision Eager Zeroed Disk
QUESTION 70
A database administrator has requested that a virtual disk attached to a virtual machine running an I/O
intensive database application be fully provisioned.
The virtual disk was initially thin provisioned. Which two methods would accomplish this task? (Choose
two.)
A. Use Storage vMotion and change the disk type to Flat.
B. Use the Inflate option in the Datastore Properties.
C. Use Storage vMotion and change the disk type to Thick Provisioned Lazy Zeroed.
D. Use Storage vMotion and change the disk type to Thick Provisioned Eager Zeroed.
Latest online browsing the VCP-510 exam!
VCP-510 PDF dumps & VCP-510 VCE dumps: http://examsavior.com
100% Pass:http://examsavior.com/
No comments:
Post a Comment