2016NEW Microsoft.70-642 EXAM] Windows Server 2008 Network Infrastructure, Configuring EXAM A PART4 (81-100) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the 70-642 Examsavior exam? What are the new questions of the latest 70-642 exam? Examsavior 70-642 VCE dumps and 70-642 PDF dumps will tell you all about the 70-642 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing  70-642 Examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

QUESTION 81

Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located

in the same subnet. You configure a split scope named Scope1 on the DHCP servers. You need to ensure

that Server2 only responds to DHCP client requests if Server1 is unavailable. What should you modify?

A. the Scope1 properties for Server1

B. the Scope1 properties for Server2

C. the server options for Server1

D. the server options for Server2

Correct Answer: B

QUESTION 82

Your network contains a DHCP server that is configured as shown in the exhibit. You need to ensure that

the DHCP server can respond to DHCP clients. What should you do?

A. From the DHCP console, authorize the DHCP server.

B. From the Services console, start the DHCP Server service.

C. From Network Connections, modify the IPv4 properties and the IPv6 properties.

D. From the Local Users and Groups snap-in, add the Server3 computer account to the DHCP

Administrators group.

Correct Answer: A

QUESTION 83

Your network contains a server named Server1. Server1 runs Windows Server 2008 R2 and has a single

network connection. The connection is configured to use a default gateway address of 10.0.0.1. The

default gateway has a metric value of 100. You configure a second default gateway that uses an address

of 10.0.0.2. You need to ensure that 10.0.0.2 is only used as the default gateway if 10.0.0.1 is

unreachable. What should you do?

A. For the interface, set the interface metric to 100.

B. For the 10.0.0.2 gateway, set the metric to 50.

C. For the 10.0.0.2 gateway, set the metric to 200.

D. For the 10.0.0.1 gateway and the 10.0.0.2 gateway, enable automatic metric.

Correct Answer: C

QUESTION 84

Your network contains two offices named Office1 and Office2. The offices connect to each other by using

a demand-dial connection. You add a new subnet in Office2. You need to ensure that a demand-dial

connection starts when users attempt to connect to resources in the new Office2 subnet. What should you

do from the Remote Routing and Access console?

A. From the remote access server in Office2, right-click the demand-dial interface and click Connect.

B. From the remote access server in Office1, right-click the demand-dial interface and click Connect.

C. From the remote access server in Office1, right-click the demand-dial interface and click Update

Routes.

D. From the remote access server in Office2, right-click the demand-dial interface and click Update

Routes.

Correct Answer: C

QUESTION 85

Your network contains a server named Server1 that has the Routing role service installed. Server1 has

two network connections. One network connection connects to the internal network. The other network

connection connects to the Internet. All network connections connected to the internal network use private

IP addresses. You install a Web server named Web1. Web1 hosts a secured Web site that only allows

connections over TCP port 8281. Web1 is connected to the internal network. You need to ensure that the

secure Web site can be accessed from the Internet. What should you do from the Routing and Remote

Access console?

A. Configure Routing Information Protocol (RIP), and then activate authentication on the RIP interface.

B. Configure Routing Information Protocol (RIP), and then configure the incoming packet protocol settings

on the RIP interface.

C. Configure Network Address Translation (NAT), and then add a new service to the NAT interface.

D. Configure Network Address Translation (NAT), and then enable the Secure Web Server (HTTPS)

service on the NAT interface.

Correct Answer: C

QUESTION 86

Your network contains the servers configured as shown in the following table. Your company is assigned

the public IP addresses from 131.107.0.1 to 131.107.0.31. You need to ensure that Web1 is accessible

from the Internet by using https://131.107.0.2. What should you do from the Routing and Remote Access

console?

A. From the Static Routes node, configure a static route.

B. From the server properties, configure SSL Certificate Binding.

C. From the NAT interface, add an address pool and a reservation.

D. From the NAT interface, configure the Secure Web Server (HTTPS) service.

Correct Answer: C

QUESTION 87

Your network contains multiple servers that run Windows Server 2008 R2. The servers have the Routing

and Remote Access Services (RRAS) role service installed. The servers are configured to support Routing

Information Protocol (RIP). You need to prevent the server from receiving routes for the 10.0.0.0 network.

What should you do from the Routing and Remote Access console?

A. From the RIP properties page, modify the General settings.

B. From the RIP properties page, modify the Security settings.

C. From the RIP interface properties page, modify the Security settings.

D. From the RIP interface properties page, modify the Neighbors settings.

Correct Answer: C

QUESTION 88

Your network contains a server named Server1 that runs Windows Server 2008 R2. The network contains

multiple subnets. An administrator reports that Server1 fails to communicate with computers on remote

subnets. You run route print on Server1 as shown in the exhibit. You need to ensure that Server1 can

communicate with all computers on the network. What should you do?

A. Disable IPv6.

B. Change the subnet mask.

C. Add a default gateway address.

D. Change the default metric to 100.

Correct Answer: C

QUESTION 89

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the

Remote Access Service role service installed. Server1 is configured as a VPN server. You need to ensure

that you can configure Server1 as a Network Address Translation (NAT) server. What should you do first

on Server1?

A. Enable IPv4 routing.

B. Enable IPv6 routing.

C. Add a new routing protocol.

D. Add the Routing role service.

Correct Answer: D

QUESTION 90

Your network contains two servers named Server1 and Server2. Server1 and Server2 run the Server Core

installation of Windows Server 2008 R2. You need to duplicate the Windows Firewall configurations from

Server1 to Server2. What should you use?

A. the Get-Item and the Set-Item cmdlets

B. the Get-Service and the Set-Service cmdlets

C. the Netsh tool

D. the Sconfig tool

Correct Answer: C

QUESTION 91

Your network contains two Active Directory sites named Site1 and Site2. Site1 contains a server named

Server1. Server1 runs a custom application named App1. Users in Site2 report that they cannot access

App1 on Server1. Users in Site1 can access App1. Server1 has a Windows Firewall with Advanced

Security rule named Rule1. You discover that Rule1 blocks the connection to App1. You verify that

Server1 has no connection security rules. You need to ensure that the Site2 users can connect to Server1.

What should you modify in Rule1?

A. the authorized computers list

B. the authorized users list

C. the edge traversal settings

D. the scope

Correct Answer: D

QUESTION 92

Your network contains an Active Directory domain. The domain contains a member server named

Server1. Server1 has a single network connection. You need to log every attempt to connect to Server1

on a restricted port. What should you do?

A. Change the settings of the private firewall profile.

B. Change the settings of the domain firewall profile.

C. Modify the properties of the inbound firewall rules.

D. Modify the properties of the outbound firewall rules.

Correct Answer: C

QUESTION 93

Your network contains a server named Server1 that has Windows Server 2008 R2. An administrator runs

the following command on Server1:

netsh.exe advfirewall reset

You discover that you can no longer access Server1 on port 3389. You need to ensure that you can

access Server1 on port 3389. Which firewall rule should you enable?

A. File and Printer Sharing (Echo Request – ICMPv4-In)

B. File and Printer Sharing (SMB-In)

C. Remote Desktop (TCP-In)

D. Remote Service Management (RPC)

Correct Answer: C

QUESTION 94

Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.

Server1 has several custom inbound rules and connection security rules. You need to duplicate the

Windows Firewall rules from Server1 to Server2. What should you do on Server1?

A. At the Command Prompt, run netsh.exe firewall dump.

B. At the Command Prompt, run netsh.exe firewall show > firewall.txt.

C. From the Windows Firewall with Advanced Security console, click Export policy.

D. From the Windows Firewall with Advanced Security console, click the Connection Security Rules node,

and then click Export List.

Correct Answer: C

QUESTION 95

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 hosts a

custom application named App1. App1 is accessible on TCP port 5000. You need to encrypt App1 data on

the network. What should you do?

A. From the Local Security Policy console, configure the Security Options.

B. From the Local Security Policy console, configure the Application Control Policies.

C. From the Windows Firewall with Advanced Security console, create an inbound rule.

D. From the Windows Firewall with Advanced Security console, create a connection security rule.

Correct Answer: D

QUESTION 96

Your network contains an Active Directory domain. All client computers run Windows XP Service Pack 3

(SP3). The domain contains a member server named Server1 that runs Windows Server 2008 R2. On

Server1, you create a connection security rule that requires authentication for inbound and outbound

connections. You configure the connection security rule to use Kerberos authentication. You need to

ensure that the client computers can connect to Server1. The solution must ensure that all connections to

Server1 are encrypted. What should you do?

A. From the Windows Firewall with Advanced Security console, create an inbound rule on Server1.

B. From the Windows Firewall with Advanced Security console, create an outbound rule on Server1.

C. From a Group Policy object (GPO), enable the Client (Respond Only) IPSec policy on all client

computers.

D. From a Group Policy object (GPO), configure the Network Security: LDAP client signing requirements

policy setting for all client computers.

Correct Answer: C

QUESTION 97

Your network contains an Active Directory domain. The domain contains two servers named Server1 and

Server2. All servers run Windows Server 2008 R2 and have Windows Firewall turned on. You need to

ensure that you can use Event Viewer on Server2 to access the Application log on Server1. What should

you do?

A. On Server2, create a new event subscription.

B. On Server2, modify the outbound firewall rules.

C. On Server1, modify the inbound firewall rules.

D. On Server1, modify the settings on the Application log.

Correct Answer: C

QUESTION 98

Your network contains a DNS server that runs Windows Server 2008 R2. You open the Forwarders

settings of the DNS server and discover that the option to add forwarders is disabled. You need to add

forwarders to the DNS server. What should you do first?

A. Enable BIND secondaries

B. Delete the “.” (root) zone.

C. Create a GlobalNames zone.

D. Delete all conditional forwarders.

Correct Answer: B

QUESTION 99

Your network contains a DNS server named DNS1 that runs Windows Server 2008 R2. You need to

ensure that DNS1 only responds to DNS queries from computers that are located in the same subnet.

What should you configure?

A. Interfaces from DNS Manager

B. Security from DNS Manager

C. Trust Anchors

D. Windows Firewall

Correct Answer: A

QUESTION 100

Your network contains a DNS server named DC1 that runs Windows Server 2008 R2. The network uses a

network ID of 10.1.1.0/24. You open the DNS console on Server1 as shown in the exhibit. You need to

ensure that all client computers can resolve the IPv4 addresses of computers on the network to fully

qualified domain names (FQDNs). What should you do?

A. Delete the “.” (root) zone.

B. Create a zone named 10.1.in-addr.arpa.

C. Create a zone named 1.1.10.in-addr.arpa.

D. Convert the 10.1.1.in-addr.arpa zone to a standard primary zone.

Correct Answer: C

Latest online browsing the 70-642 exam!

70-642 PDF dumps & 70-642 VCE dumps: http://examsavior.com/70-642

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/