Do you want to pass the 70-643 Examsavior exam? What are the new questions of the latest 70-643 exam? Examsavior 70-643 VCE dumps and 70-643 PDF dumps will tell you all about the 70-643 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing 70-643 Examsavior exam.Hurry up and get the free exam from here!
NOW FREE DOWNLOAD
Exam D
QUESTION 1
Your network contains a Web server that runs Windows Server 2008 R2. You need to generate a report
for each Active Server Page (ASP) that takes more than two seconds to process.
What should you use?
A. Reports in Performance Monitor
B. Data Collector Sets (DCSs) in Performance Monitor
C. Logging in Internet Information Services (IIS) Manager
D. Failed Request Tracing Rules in Internet Information Services (IIS) Manager
Correct Answer: D
QUESTION 2
Your network contains a Web server that runs Windows Server 2008 R2.
You need to back up all Web site content.
Which tool should you use?
A. Appcmd
B. Internet Information Services (IIS) Manager
C. Internet Information Services (IIS) 6.0 Manager
D. Wbadmin
Correct Answer: D
QUESTION 3
You install all of the Web Server (IIS) role services on a server named Server1. You configure the Default
Web Site to assign the IIS Manager Permissions for the site to a user named User1.
From a different computer, User1 attempts to connect to the Default Web Site on Server1 by using
Internet Information Services (IIS) Manager and receives the following error message:
![2016NEW Microsoft.70-643 EXAM] Windows Server 2008 Network Infrastructure, Configuring EXAM D PART1 (1-20) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE 2016NEW Microsoft.70-643 EXAM] Windows Server 2008 Network Infrastructure, Configuring EXAM D PART1 (1-20) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE](http://www.hotitexam.com/wp-content/uploads/2016/08/wps2655.tmp_.jpg)
You need to ensure that User1 can use Internet Information Services (IIS) Manager to remotely administer
the Default Web Site on Server1.
What should you do first?
A. From the Internet Information Services (IIS) Manager console, configure the Feature Delegation
feature.
B. From the Internet Information Services (IIS) Manager console, configure the Management Service
feature.
C. From the Services console, modify the properties of the Web Management Service service.
D. From the Services console, modify the properties of the Windows Remote Management (WSManagement)
service.
Correct Answer: B
QUESTION 4
Your network contains two Web servers named Server1 and Server2.
Server1 has a Web site named Site1. Site 1 is configured to use SSL.
You need to import the SSL certificate from Server1 to Server2. The solution must ensure that the private
key is also imported.
Which format should you use to export the certificate?
A. Base-64 encoded X.509 (.cer)
B. Cryptographic Message Syntax Standard PKCS #7 (.p7b)
C. DER encoded binary X.509 (.cer)
D. Personal Information Exchange PKCS #12 (.pfx)
Correct Answer: D
QUESTION 5
Your network contains a Web server named Web1 that runs Windows Server 2008 R2.
You import an SSL certificate to Web1.
You need to enable SSL encryption for the Web site.
What should you do?
A. Add a new binding to the Web site.
B. Modify the Server Certificates settings.
C. Configure the handler mappings for the Web site.
D. Configure the Machine Key feature for the Web site.
Correct Answer: A
QUESTION 6
Your network contains a Web server named Web1 that runs Windows Server 2008 R2. Web1 has a
wildcard certificate installed.
Web1 has two Web sites as shown:
![2016NEW Microsoft.70-643 EXAM] Windows Server 2008 Network Infrastructure, Configuring EXAM D PART1 (1-20) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE 2016NEW Microsoft.70-643 EXAM] Windows Server 2008 Network Infrastructure, Configuring EXAM D PART1 (1-20) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE](http://www.hotitexam.com/wp-content/uploads/2016/08/wps2656.tmp_.jpg)
You discover that when you go to the URL https://site1.contoso.com in Internet Explorer, you connect to
Site2.
You need to ensure that when users go to https://site1.contso.com in Internet Explorer, they connect to
Site1.
The solution must ensure that all connections to Site1 are secure.
Which two settings should you modify? (Each correct answer presents part of the solution. Choose two.)
A. the bindings for Site1
B. the bindings for Site2
C. the HTTP Redirect settings for Site1
D. the HTTP Redirect settings for Site2
Correct Answer: AB
QUESTION 7
Your network contains a Web server that runs Windows Server 2008 R2. The server has two Web sites
named Site1 and Site2. Site1 is accessed by using the name site1.contoso.com. Site2 is accessed by
using the name site2.contoso.com.
You plan to configure both Web sites to use SSL encryption. You need to ensure that users can access
Site1 by using the URL https://site1.contoso.com and Site2 by using the URL https://site2.contoso.com.
What should you configure for each Web site?
A. a different application pool
B. a different host header site binding
C. a different IP address site binding
D. a different port site binding
Correct Answer: C
QUESTION 8
Your network contains a Web server.
You need to ensure that users can only access files that have the .htm, .html, .asp, and .aspx file
extensions.
What should you do?
A. Add an authorization rule.
B. Modify the handler mappings.
C. Update the default documents list.
D. Configure the request filtering settings.
Correct Answer: D
QUESTION 9
Your network contains a Web server that runs Windows Server 2008 R2. The Web server has the Client
Certificate Mapping Authentication role service installed.
You create a Web site that requires client certificates for authentication.
You need to enable client certificate mapping for the Web site.
Which tool should you use?
A. Appcmd
B. Certutil
C. the Authorization Manager snap-in
D. the Certificates snap-in
Correct Answer: A
QUESTION 10
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Streaming Media Services role and the Web Server (IIS) role installed. Server1 hosts the company’s
intranet Web site.
You need to configure Windows Media Services to stream content by using HTTP.
What should you do first?
A. Install the RPC over HTTP proxy server feature.
B. Configure a host header for the intranet Web site.
C. Configure the server to have an additional IP address.
D. Create a new virtual directory on the intranet Web site.
Correct Answer: C
QUESTION 11
Your network contains a server that runs Windows Server 2008 R2. You need to install the Streaming
Media Services role on the server.
What should you do first?
A. Download and install Windows Media Encoder 9 Series x64 Edition.
B. Download and install Windows Media Services 2008 for Windows Server 2008 R2.
C. From Server Manager, click Check for new roles.
D. From Server Manager, install the Quality Windows Audio Video Experience (qWave) feature.
Correct Answer: B
QUESTION 12
Your network contains a server that runs Windows Server 2008 R2. The server has the Streaming Media
Services role installed.
The network is configured to use IPv6 only.
You need to configure a multicast stream.
Which IPv6 prefix should you use?
A. FD00::/8
B. FE80::/10
C. FEC0::/10
D. FF00::/8
Correct Answer: D
QUESTION 13
Your network contains two servers named Server1 and Server2 that have the Streaming Media Services
role installed. Server1 is located in a subnet named Subnet1. Server2 is located in a subnet named
Subnet2.
Server1 has an on-demand publishing point named Content1. Content1 has a 1-Mbps bit rate.
Server2 is configured as a cache/proxy server.
You need to ensure that users on Subnet2 can stream Content1 from Server2. The solution must ensure
that Content1 is available on Server2 before the users request the stream.
What should you modify?
A. the Cache settings on Server1
B. the Prestuff settings on Server2
C. the Proxy settings on Server1
D. the Cache settings on Server2
Correct Answer: B
QUESTION 14
Your network contains a server that runs Windows Server 2008 R2.
You install Windows Media Services on the server.
You need to stream a live video broadcast. The solution must minimize any delays caused by network
congestion.
What should you do?
A. Create a broadcast publishing point that delivers content by using unicast. Stream the content by using
HTTP.
B. Create an on-demand publishing point that delivers content by using unicast. Stream the content by
using HTTP.
C. Create a broadcast publishing point that delivers content by using multicast. Stream the content by
using real-time streaming protocol (RTSP).
D. Create an on-demand publishing point that delivers content by using unicast. Stream the content by
using real-time streaming protocol (RTSP).
Correct Answer: C
QUESTION 15
Your network contains a server that runs Windows Server 2008 R2.
You install Windows Media Services on the server.
You need to create an announcement file that allows Windows Media Player clients to decode multicast
streams.
Which file extension should you use for the announcement file?
A. .asx
B. .htm
C. .nsc
D. .wsx
Correct Answer: C
QUESTION 16
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Streaming Media Services role installed.
You discover that anonymous users can access video content stored on Server1. You need to ensure that
user access to videos on the server requires authentication.
What should you do?
A. From the Windows Media Services console, configure the Authorization properties.
B. From the Windows Media Services console, configure the Authentication properties.
C. From Internet Information Services (IIS) Manager, configure the Authentication settings.
D. From Internet Information Services (IIS) Manager, configure the .Net Authorization Rules settings.
Correct Answer: B
QUESTION 17
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Streaming Media Services role and the Web Server (IIS) role installed.
You have a confidential media file.
You need to ensure that the media file streams are encrypted.
Which protocol should you configure?
A. HTTPS
B. IPSec
C. Microsoft Media Server (MMS)
D. real-time streaming protocol (RTSP)
Correct Answer: B
QUESTION 18
Your network contains a server named Server1. Server1 has the Streaming Media Services role installed.
You have media files stored on a hard disk drive. The hard disk drive is formatted by using the NTFS file
system and protected by using Encrypted File System (EFS).
You need to ensure that Windows Media Services can open the EFS-encrypted files.
What should you do?
A. From the Windows Media Services console, configure the WMS NTFS ACL Authorization plug-in.
B. From the Windows Media Services console, configure the WMS Publishing Points ACL Authorization
plug-in.
C. From the Services console, configure the properties of the Protected Storage service, and then start
the service.
D. From the Services console, configure the properties of the Windows Media Services service, and then
restart the service.
Correct Answer: D
QUESTION 19
Your network contains a server named Server1. Server1 has the Streaming Media Services role installed.
The network contains two subnets named Subnet1 and Subnet2. You create an on-demand publishing
point named Publishing1 on Server1. You need to ensure that only users from Subnet1 can access
Publishing1.
What should you configure from the Windows Media Services console?
A. From the properties of Server1, configure the Limits settings.
B. From the properties of Server1, configure the Authentication settings.
C. From the properties of Publishing1, configure the Credentials settings.
D. From the properties of Publishing1, configure the Authorization settings.
Correct Answer: D
QUESTION 20
Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Streaming Media Services role installed.
On Server1, you create an on-demand publishing point named PublishingPoint1. You need to ensure that
only members of a group named Group1 can access content from PublishingPoint1.
Which two plug-ins should you configure for PublishingPoint1? (Each correct answer presents part of the
solution. Choose two.)
A. WMS Anonymous User Authentication
B. WMS IP Address Authorization
C. WMS Negotiate Authentication
D. WMS Publishing Points ACL Authorization
Correct Answer: CD
Latest online browsing the 70-643 exam!
70-643PDF dumps & 70-643 VCE dumps: http://examsavior.com/70-643
100% Pass:http://examsavior.com/
No comments:
Post a Comment