2016NEW 400-201 EXAM] Cisco.CCIE Service Provider Written Exam PART2 (21-40) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the 400-201 Examsavior exam? What are the new questions of the latest 400-201  exam? Examsavior 400-201 VCE dumps and 400-201   PDF dumps will tell you all about the 400-201 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing 400-201 Examsavior exam.Hurry up and get the free exam from here!

NOW FREE DOWNLOAD

QUESTION NO: 21
Which are the two purposes of the MPLS label value 1? (Choose two.)
A. it is used for MPLS OAM packets.
B. it indicates an implicit null label.
C. it is used for VPNv6 packets.
D. it is used to carry the QoS value in the label stack.
E. it indicates an explicit null label.
F. itindicates a router alert label.
Answer: C,F
Explanation: http://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/mpls/4649-mpls-faq-4649.html#qa3
http://www.iana.org/assignments/mpls-label-values/mpls-label-values.xhtml
IPv4 Explicit NULL Label —-> 0 Router Alert Label —-> 1
IPv6 Explicit NULL Label —–> 2 Implicit NULL Label —–> 3 OAM Alert Labe —–> 14

QUESTION NO: 22 Refer to the exhibit. Why is R3 unable to install 1.1.1.1/32 in its routing table?

A. 11.11.11.11/32 exists in the routing table, so the conditional advertising is not working.
B. The route is filtered out by theip prefix-list ROUTE-INcommand.
C. 11.11.11.11/32 is advertising in the BGP table, so conditional advertising is not working.
D. Thebgp redistribute-internalcommand is missing under the R2 BGP process.
Answer: B Explanation:

QUESTION NO: 23 An engineer wants to configure Fast Reroute in the network. Which methodology eliminates RSVP configuration in the network?
A. Enable LDP Fast Synch.
B. Enable IP Fast Reroute.
C. Enable theauto tunnelprimary feature.
D. Enable Cisco MPLS TE Fast Reroute.
E. Enable theauto tunnelbackup feature.

Answer: B
Explanation:http://www.cisco.com/en/US/docs/ios/12_0st/12_0st10/feature/guide/fastrout.html

QUESTION NO: 24
What are three actions that the control word performs in MPLS AToM? (Choose three.)
A. is used to identify the VC label
B. is used for padding small packets
C. preserves the sequence of the transported frames
D. facilitates the load balancing of AToM packets in the MPLS backbone network
E. carries control bits of the Layer 3 header of the transported protocol
F. is used to identify the tunnel label
Answer: B,C,D
Explanation: https://ccdewiki.wordpress.com/2013/05/28/control-word-on-atom/

QUESTION NO: 25
What are two advantages of Cisco IOS XR Software over Cisco IOS Software? (Choose two.)
A. a configuration that is grouped by interface
B. a configuration that is grouped by process
C. one-stage configuration
D. a monolithic OS
E. a two-stage configuration
Answer: B,E Explanation:

QUESTION NO: 26 Which are two major changes SyncE offers over traditional Ethernet to make it suitable for clock distribution? (Choose two.)
A. SyncE introduces the concept of “Boundary Clocks” and “Transparent Clocks” improvingnetwork scalability and accuracy of clock synchronization.
B. Industry standard that guarantee interoperability, since granular details, such as specific field values are specified.
C. A mandated clock accuracy of 4.6ppm.
D. The ESMC protocol forclock selection, distribution, management, traceability, and failover.
E. High-priority synchronization packets so it can continually adjust its own oscillator.

Answer: C,D
Explanation: http://www.cisco.com/c/en/us/support/docs/optical/synchronous-optical-network- sonet/23718-timefaq-23718.html
http://cp.literature.agilent.com/litweb/pdf/5990-4386EN.pdf

QUESTION NO: 27
What is the PPMP label used for?
A. for the ingress replication model with BIDIR-PIM in an overlay model
B. only for the inter-ASmVPN models that use mLDP
C. for the partitioned mVPNmodel with PIM signaling in an overlay model
D. only for unicast over MPLS VPN
E. for all the default MDT and mVPN models
Answer: D
Explanation: http://lostintransit.se/tag/bgp/ https://tools.ietf.org/html/draft-rosen-l3vpn-mvpn-mspmsi-08#section-3.2.2.1

QUESTION NO: 28
Based on the following configuration:
vrf definition ABC rd 10.0.0.1:1000
!address-family ipv4 route-target export 1:1 route-target import 1:1 mdt default 232.0.0.1 Which two statements about multicast VPN configuration are true? (Choose two.)
A. The multicast tree is created based only on the existence of active sources or receivers behind PEs in the ABC VRF.
B. The service provider core network is required to support SSM.

C. Multicast needs to be enabledonly on ABC VRF and is tunneled to participating PE routers in the ABC VRF.
D. The SP core network is required in order to enable the BGP Multicast Address Family on allpeering.
E. Multicast is required for the core network in addition to the ABC VRF.
F. The multicast tree exists regardless of whether there are any active sources or receivers in the ABC VRF.
Answer: E,F
Explanation: http://www.ciscopress.com/articles/article.asp?p=32100&seqNum=4http://www.cisco.com/en/US/tech/tk828/technologies_white_paper09186a00800a3db6.shtml

QUESTION NO: 29
An engineer is implementing an MPLS within the core of the Service Provider network. What two components are required to build the control and data plane for MPLS Label Switched Paths? (Choose two.)
A. FIB
B. CEF
C. LDP
D. LFIB
E. OSPF
Answer: B,C Explanation:

QUESTION NO: 30
Refer to the exhibit. Customer XYZ Site 1 is not learning prefixes from Site 2. What is the issue?

A. MPLS LSP is broken along the path.
B. Theroute-policyis not implemented in router PE-2.
C. The BGPlocal-ascommand should be used between PE-1 and CE-1.
D. The route-distinguisher values must match in both sites.
E. The BGPas-overridecommand should beimplemented between PE-1 and CE-1.
Answer: E Explanation:

QUESTION NO: 31 Refer to the exhibit. A network engineer must configure BFD for IS-IS between R1 and R2. In case the primary link fails, the convergence time should be less than a second. Which two IOS commands are required to meet this requirement? (Choose two.)

A. isisbfd
B. bfd minimum-interval 250
C. bfd interval 250 min_rx 250 multiplier 3
D. bfd multiplier 3
E. bfd interval 250 min_rx 250 multiplier 4
F. bfd fast-detect ipv4
Answer: C,F
Explanation: http://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r4-3/routing/command/reference/b_routing_cr43xxr12k/b_routing_cr43xxr12k_chapter_010.html#wp3 058619742

QUESTION NO: 32

An engineer must implement E-Line services for a service provider network. Which two services apply in this situation? (Choose two.)
A. EVPL
B. E-Tree
C. E-LAN
D. EVC
E. EPL
Answer: A,E
Explanation: http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/fulfillment/6-2/theory/operations/guide/theory/l2ce.pdf

QUESTION NO: 33
Refer to the exhibit. After the BGP TCP negotiation between RouterA and RouterB, what will be the value of the keep alive timer and the hold-down timer, respectively?

A. 3 seconds and 9 seconds
B. 60 seconds and 180 seconds
C. 10 seconds and 9 seconds
D. no value, because BGP negotiation will not be successful
E. 10 seconds and 10 seconds
F. 10 seconds and 30 seconds
G. 3 seconds and 30 seconds
H. 3 seconds and 10 seconds
Answer: A Explanation:

QUESTION NO: 34
In a routing virtualization concept, which are the two main techniques for creating virtualized router entities as defined by their physical and operational characteristics? (Choose two.)
A. VDC
B. SVR
C. DRP
D. HVR
E. SDR
Answer: B,D Explanation:
http://www.cisco.com/en/US/solutions/collateral/ns341/ns524/ns562/ns573/white_paper_c11-512753_ns573_Networking_Solutions_White_Paper.html

QUESTION NO: 35
Which two statements about Unified MPLS are true? (Choose two.)
A. Unified MPLS works on Cisco IOS XR Software only.
B. Unified MPLS extends MPLS across multidomain networks in a scalable manner.
C. New technologies or protocols are not used; only MPLS, LDP, IGP, and BGP are used.
D. ABR loopback prefixes should always be redistributed from the core IGP into the aggregation IGP.
E. The RRs are part of the control path only.
Answer: B,D
Explanation: http://www.cisco.com/c/en/us/support/docs/multiprotocol-label-switching-mpls/mpls/116127-configure-technology-00.pdf

QUESTION NO: 36
Customers connecting to a Service Provider for Internet access are intending to implement redundant peering. The design requirements call for preferring a primary link for both ingress and egress traffic. Secondary links should be used only during primary outages. What two BGP deployment options will accomplish this design goal? (Choose two.)
A. On the router handlingthe secondary link, advertise routes with a MED value of 0.

B. On the router handling the primary link, setthe weight for all incoming routes to be a value of 0.
C. On the router handling the secondary link, advertise all routes with a longer AS-PATH value.
D. On the router handling the primary link, advertise all routes with a longer AS-PATH value.
E. On the router handling the secondary link, set the local preference for all incoming routes to be a value of 0.
Answer: C,E Explanation:

QUESTION NO: 37 Refer to the exhibit. A customer is running IS-IS within a network and is using BGP as a CE-PE routing protocol. Which action allows CE1 to get the subnet 10.10.2.0/24 over the CE1-PE1 link, regardless of whether there is a flap in the MPLS link or backdoor link?

A. Configure theneighbor <PE1-IP>weight 33768command on CE1 under the BGP process.
B. Configure thedistance bgp 115 200 200command on CE1 under the BGP process.
C. Configure thedistance 30ipcommand on CE1 under the IS-IS process.
D. Configure thedistance bgp 115 200 200command on CE2 under the BGP process.
E. Configure theneighbor <PE1-IP>weight 33768command on CE2 under the BGP process.
Answer: B

QUESTION NO: 38

Which are the two fundamental ways in which IEEE 1588 differs from SyncE? (Choose two.)
A. In addition to frequency synchronization, it achieves ToD synchronization to achieve phase alignment which is required for multi-channel communication.
B. It is a purely-based solution, with the actual clock values being passed inside the payloads of special packets dedicated to that task.
C. It offers two major changes over traditional Ethernet to make it suitable for clock distribution: a mandated clock accuracy and the ESMC protocol for clock selection, distribution, management, traceability, and failover.
D. SyncE is a Cisco proprietary ToDtechnologywhere IEEE 1588 is a industry standard recommended for interoperability across vendor devices.
E. IEEE 1588 applies to voice-only systems or with low-bandwidth data traffic.
Answer: A,B
Explanation: http://www.eetimes.com/document.asp?doc_id=1278660

QUESTION NO: 39
Refer to the exhibit. Both MPLS TE tunnel 14 and MPLS TE tunnel 124 pass over the same physical links. Which configuration on R1 enables TE 14 to be the primary tunnel and TE 124 to become active when TE 14 is admin disabled?

A. Interface Tunnel14
tunnelmpls traffic-eng priority 3 1 !Interface Tunnel124 tunnelmpls traffic-eng priority 5 4
B. Interface Tunnel14
tunnelmpls traffic-eng priority 4 1 !
`Interface Tunnel124

tunnelmpls traffic-eng priority 3 2
C. Interface Tunnel14
tunnelmpls traffic-eng priority 7 7 !Interface Tunnel124 tunnelmpls traffic-eng priority 1 1
D. Interface Tunnel14
tunnelmpls traffic-eng priority 3 2 !Interface Tunnel124 tunnelmpls traffic-eng priority 4 1

Answer: B

QUESTION NO: 40 A network engineer wants to decrease the convergence time of a network that is running integrated IS-IS as an IGP, at the expense of bandwidth and CPU usage. Which two configuration tasks achieve this goal? (Choose two.)
A. Configure thehold timeto be 1 second.
B. Configure thehello intervalto be minimal.
C. Ensure thathello-paddingis disabled.
D. Ensure that thehello multiplieris set to 3.
E. Configure thehello multiplierto be 3.
Answer: B,D

Explanation:
https://books.google.co.in/books?id=u_XOQy4cBkgC&pg=PA184&lpg=PA184&dq=what+is+hello+multiplier+minimal+time+in+integrated+is-is&source=bl&ots=XqDfyO3AVT&sig=NHY0L-k- nhHrg7h6i3RWorttgcE&hl=en&sa=X&ved=0CDAQ6AEwA2oVChMIhfCI5ZXTxwIVQwaOCh3PfQe a#v=onepage&q=what%20is%20hello%20multiplier%20minimal%20time%20in%20integrated%20 is-is&f=false

Latest online browsing the 400-201 exam!

400-201 PDF dumps & 400-201 VCE dumps: http://examsavior.com/350-080

	Examsavior	Test King	Pass4sure	Actual Tests	Other Brands
Customer Reviews
	$89.99	$124.99	$125.99	$189.00	$29.99~$49.99
Up-To-Dated
Real Questions & Answers
Correct All Error
Premium VCE Dumps
Free VCE Simulator
Unlimited After One Time Purchasing
Instant Download
Printable PDF Dumps
100% Pass Guarantee
100% Money Back

100% Pass:http://examsavior.com/