Wednesday, August 3, 2016

2016NEW Amazon VCP550 EXAM] VMware Certified Professional on vSphere 5 EXAM A PART9 (211-230) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE

Do you want to pass the VCP550 Examsavior exam? What are the new questions of the latest VCP550 exam? Examsavior VCP550 VCE dumps and VCP550 PDF dumps will tell you all about the VCP550 Examsavior exam.Here are the Examsavior newest and covered all new added questions and answers, which will help you 100% passing  VCP550 Examsavior exam.Hurry up and get the free exam from here!
NOW FREE DOWNLOAD
http://examsavior.com/70-414


QUESTION 211
211
An administrator of a secure environment needs to add an iSCSI target to a new ESXi host using
the vSphere client. The administrator has configured discovery and performed a rescan operation,
but the iSCSI target does NOT appear.
Which action should the administrator take for the target to appear in the vSphere client?
A. Configure appropriate CHAP authentication settings
B. Bind a VMkernel port to the iSCSI initiator
C. Configure Jumbo Frames prior to adding iSCSI targets
D. Enable iSCSI in a vSphere Distributed Switch configuration
Correct Answer: A
QUESTION 212
2016NEW Amazon VCP550 EXAM] VMware Certified Professional on vSphere 5 EXAM A PART9 (211-230) VCE DUMPS FOR FREE DOWNLOAD WITH 100%PASS ENSURE
Which field should an administrator add to a Virtual SAN Disk Group under the Device Backing
settings to monitor the health of disks in the Disk Group?
A. Issue
B. Operational Status
C. Capacity
D. Transport Type
Correct Answer: A
QUESTION 213
213
An administrator has created a Virtual SAN Cluster using Automatic Mode Disk Groups. There is
very little storage space left in the cluster. The administrator has access to an iSCSI storage array.
Which approach should the administrator take to expand the Virtual SAN Cluster?
A. Add new hosts to the cluster with available local disks then click the Claim Disks icon in the
Disk Management section under the Virtual SAN tab.
B. Add new disks to the hosts in the cluster then click the Claim Disks icon in the Disk
Management section under the Virtual SAN tab.
C. Add new hosts to the cluster with available local disk. No further action is required to claim the
added storage.
D. Provision new LUNs on the iSCSI storage and present one LUN to each host in the cluster. No
further action is required to claim the added storage.
Correct Answer: C
QUESTION 214
214
A vSphere administrator needs to place an ESXi host in maintenance mode to replace a hardware
component. This host is a member of a Virtual SAN cluster that uses Automatic Mode Disk
Groups. Availability of virtual machines running on this host is critical. HA and DRS are enabled on
the Virtual SAN Cluster. Otherwise, the Virtual SAN cluster uses default values.
Which action should the administrator take to automatically guarantee availability of virtual
machines with the fastest migration time?
A. Select Enter Maintenance Mode and accept the default values
B. Select Enter Maintenance Mode and select Full Data Migration option
C. Select Enter Maintenance Mode and select No Data Migration option
D. Migrate the virtual machines to another host and datastore then select Enter Maintenance
Mode
Correct Answer: A
QUESTION 215
215
What is a characteristic of Virtual SAN?
A. It supports Virtual Machine Storage Policies.
B. It supports multiple Virtual SAN clusters for each host.
C. It supports native snapshots and SE Sparse disks.
D. It supports storage attached through USB, Fibre Channel, or iSCSI.
Correct Answer: A
QUESTION 216
216
Which two steps can an administrator take to upgrade an existing VMFS2 datastore to VMFS5?
(Choose two.)
A. Attach the VMFS2 datastore to an ESX 3.x host and upgrade it to VMFS3
B. Attach the VMFS2 datastore to the vSphere 5 host and upgrade it to VMFS3
C. Upgrade the datastore from VMFS3 to VMFS5 on a vSphere 5 host
D. Upgrade the ESX host attached to the storage to vSphere 5
Correct Answer: AC
QUESTION 217
217
A customer needs to select an appropriate Path Selection Policy (PSP) for their storage array.
There is no requirement for a preferred path. The policy should not select a new path unless the
current one fails.
Which PSP meets the requirement?
A. Fixed
B. Round Robin
C. Most Recently Used
D. Asymmetric Logical Unit Access
Correct Answer: C
QUESTION 218
218
An administrator needs to unmount a datastore that is also used for HA storage heartbeats.
What is the least disruptive method for an administrator to perform this activity on a slave HA
host?
A. On the Datastore Heartbeating tab, unmount the datastore normally and confirm a new
datastore has been selected.
B. On the Datastore Heartbeating tab, specify an alternate datastore, then unmount the datastore
normally.
C. Disable HA datastore heartbeats, then unmount the datastore.
D. Reduce the number of heartbeat datastores, then remove the datastore from the heartbeat list.
Correct Answer: B
QUESTION 219
219
When deploying two sibling resource pools (RP1 and RP2), an administrator needs to make all
resources in RP1 available to virtual machines in RP2.
Which configuration should the administrator use to meet this requirement?
A. Set the Reservation of RP2 to 0
B. Set the Reservation of RP1 to 0
C. Set the Limit of RP1 to Unlimited
D. Set the Limit of RP2 to Unlimited
Correct Answer: B
QUESTION 220
220
Which controller is recommended for high disk I/O workloads?
A. BusLogic Parallel
B. LSI Logic Parallel
C. LSI Logic SAS
D. VMware Paravirtual
Correct Answer: D
QUESTION 221
221
An administrator needs to migrate a company’s physical servers to virtual servers and deploy into
the ESXi 5.x cluster. During the process of converting to a virtual machine, the administrator
needs to reduce the size of the disks.
Which method should the administrator use to meet this requirement?
A. Use VMware Converter hot cloning with volume-based cloning at the file level
B. Shut down the physical server and use VMware Converter cold cloning with volume-based
cloning at the block level
C. Use VMware Converter hot cloning with volume-based cloning at the block level
D. Shut down the physical server and use VMware Converter cold cloning with volume-based
cloning at the file level
Correct Answer: A
QUESTION 222
222
Which steps should an administrator take to migrate existing ESXi 5.x virtual machines to a
storage over-subscription model?
A. Right-click the .vmdk file, and click Deflate.
B. Right-click the .vmdk file, and click Compress.
C. Right-click the virtual machine, click Migrate, select the same datastore, and select Thin
Provision.
D. Right-click the virtual machine, click Migrate, select a different datastore, and select Thin
Provision.
Correct Answer: D
QUESTION 223
223
An administrator needs to manage a virtual machine that cannot be accessed directly from an
external network.
Which solution should the administrator choose?
A. Power off the virtual machine and use the vSphere Web Client to open a console to the virtual
machine.
B. Install the Client Integration Plug-in in the Web browser and open a console to the running
virtual machine.
C. Install the DCUI plug-in in the Web browser and open a console to the running virtual machine.
D. Power off the virtual machine, install the Client Integration plug-in, and open a console to the
virtual machine.
Correct Answer: B
QUESTION 224
224
A vSphere administrator deleted a vApp from disk. A second administrator needs the virtual
machines that were contained in the vApp.
What should the first administrator do to make the virtual machines available?
A. Recover the virtual machines from backup
B. Add the virtual machines back into inventory
C. Undelete the vApp
D. Recover the virtual machines from Stranded Items
Correct Answer: A
QUESTION 225
225
A vSphere Administrator has a multi-tier application deployed in a vApp. The administrator needs
to rapidly deploy copies of the multi-tier application to various departmental infrastructures
throughout the company.
Which step should the administrator take using the vSphere Web Client to allow this?
A. Export the vApp as an OVF Template
B. Convert the vApp to a Template
C. Clone the vApp to a OVF Template
D. Add the vApp to the Catalog
Correct Answer: A
QUESTION 226
226
The bandwidth between two sites is too slow to transfer large virtual machine files. The
administrator needs to export a virtual machine to OVF to reduce the size of the transfer. When
the administrator attempts to initiate the Export OVF Template feature, the selection is grayed out.
What is the likely reason that the administrator is unable to select this option?
A. The virtual machine is in a powered on state.
B. There is not enough disk space on the destination for the OVF.
C. The administrator’s account does not have the correct privileges.
D. The virtual machine is not compatible with the OVF format.
Correct Answer: A
QUESTION 227
227
A system administrator is deploying a Windows virtual machine from a template and needs the IP
address to be customized automatically.
How should the administrator configure the IP address?
A. Use the Microsoft Sysprep Tool.
B. Specify IP addresses using the Deploy Virtual Machine Wizard.
C. Use the VMware Quickprep Tool.
D. Manually configure IP addresses after the deployment has completed.
Correct Answer: A
QUESTION 228
228
An administrator needs to establish that a database server is entitled to twice the CPU resources
than a web server during CPU resource contention.
Which settings should the administrator change to accomplish this?
A. Set the database server’s CPU Shares to High and leave the web server’s CPU Shares at
Normal.
B. Set the database server’s CPU Shares to High and change the web server’s CPU Shares to
Low.
C. Set the database server’s Shares to High and change the web server’s CPU Shares value to a
custom value of 500.
D. Set the database server’s Shares to a Custom value of 500 and leave the web server’s CPU
Shares at Normal.
Correct Answer: A
QUESTION 229
229
What should an administrator do to identify compliance for virtual machine storage performance?
A. Create a Storage Policy and apply it to the virtual machine
B. Create Storage Capabilities and apply one or more capabilities to the virtual machine
C. Create a Storage Policy and apply it to the datastore containing the virtual machine
D. Create Storage Capabilities and apply one or more capabilities to the datastore containing the
virtual machine
Correct Answer: A
QUESTION 230
230
During a physical network reconfiguration, an ESXi host briefly lost connection to the management
network. High Availability (HA) began powering off the virtual machines residing on the affected
host to be restarted on an unaffected host in the cluster.
Which setting should the administrator configure to prevent this behavior in the future?
A. Host isolation response
B. Host monitoring
C. VM monitoring
D. Admission control
Correct Answer: A

Latest online browsing the VCP550 exam!
VCP550 PDF dumps & VCP550 VCE dumps: http://examsavior.com
 ESTKPSATOB
 
Test King
Pass4sure
Actual Tests
Other Brands
Customer Reviews5stars1star1star1star1star
 
$89.99
$124.99
$125.99
$189.00
$29.99~$49.99
Up-To-DatedAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Real Questions & AnswersAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Correct All ErrorAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Premium VCE DumpsAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Free VCE SimulatorAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Unlimited After One Time PurchasingAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Instant DownloadAvailableNotAvailableNotAvailableNotAvailableNotAvailable
Printable PDF DumpsAvailableNotAvailableNotAvailableNotAvailableNotAvailable
100% Pass GuaranteeAvailableNotAvailableNotAvailableNotAvailableNotAvailable
100% Money BackAvailableNotAvailableNotAvailableNotAvailableNotAvailable

No comments:

Post a Comment